Vinyl Works Deluxe Adjustable 24 Inch Wide in Pool Step Ladder Entry System for Above Ground Swimming Pools with Non Slip Steps, Taupe

Bought these because they fit our budget. The stairs are very easy to assemble and very sturdy. I assembled them mostly myself with some help from my young son. A word of caution, the back edge of the top step was a bit sharp and I can see it damaging the pool liner if it makes contact. I sanded it smooth and it's not a concern. I had to add a small block of wood to attach it more securely to the deck but that was easy. Also, instead of filling it with sand, I zip tied a couple of weights to the inside of the ladder and that keeps the stairs securely in place. When the time comes to close the pool, it should be easy enough to lift the stairs out of the pool after removing the weights. I definitely recommend the product.

Not too hard to put together Directions aren’t the best & the top the rails are a little confusing. Two things we did wrong we didn’t pay attention to light hole step and put that on the 3rd step instead of the 2nd NBD but definitely make sure not to screw/secure the top rails to the bottom until you measure the height to the deck. Had to take apart and cut. Another word of advise make sure to hold down and thoroughly fill with water I stood on them and turn it side to side and then once almost filled we put heavy tiles on them and let them sit overnight. Very happy the deck is new and I’ve been waiting to do this for years. I’m hoping this will be the last ladder I will ever have to buy!!

Was not very hard to assemble my husband did use a handheld blowtorch to help with the bending parts. The arms are the only flimsy part and will probably break at some point.

We bought this to replace the A frame ladder that came with our pool after we built a wrap around deck and could no longer use the ladder that goes inside and outside the pool. As with all of my pool purchases I read a lot of reviews before I buy anything because it is sooo expensive for pool stuff and sometimes it's still junk. I would agree with other reviewers that it was a bit of work to put it together, but certainly less difficult that the ladder that came with the pool. Anybody could probably do it. My husband put it together inside - don't do this it left little plastic shavings everywhere. We had to trim the arms to get them to fit but the instructions tell you to do this so you will need a saw. I was hesitant to drill holes in my resin top ledge, but there is no way it would be sturdy without doing this. Holes were easy to make and doesn't seem to bother the pool much. My husband is 6'3" and almost 300 lbs - didn't budge when he gets in or out. He did drill a couple holes in the inside where nobody could see them to fill it with water. Like another reviewer said, it still wants to float but just barely. This actually takes up less space than the A ladder we had been using that came with the pool. And it was scary getting in and out because it would wobble side to side. If I had to dig deep and find anything I don't like so far - I don't really care for the hole in the middle where the light can go. I wish there was a piece there you had to pop out if you were going to use the light. We went with a return fitting light (you can read my review on that too - LOVE IT!). But honestly it's not that noticeable. One thing worth noting, there's a circle notch on the outside of each of the arms outside of the pool. I have no idea what these are for. Maybe to hang a sign that says "pool closed?" or something across the ladder arms? Not sure but the instructions don't say anywhere what these are for. Overall very pleased, would buy again.

Easy to assemble and stair material seems strong BUT the rails are junk and are not sturdy. The directions they send are less than helpful so we went onto YouTube and found videos to help. The screws for the railings should have been longer instead of the short ones they send. But honestly the design is poor anyways and would need down supports in addition to the longer screws. I have had to place wooden 4x4 post cutoffs next to the top railing on the top of our deck to give that added support. It’s ugly but after shelling out too much money for this junk I just want strength and safety for my family when using the pool stairs. Too bad it is too late and would be tough to get the tiny gravel out we used to weight it down with, to send it back otherwise I would. I will say that the width of the stairs is nice and wide. Nice idea but needs some modifications. I would recommend you keep looking but that’s just my opinion.

Arrived in 2 days, got it assembled and installed in just over an hour. Goodbye horrible ladders, hello stairs! Just what me and the old lady needed for better access to the pool. L O V E I T !

Package arrived opened, no instructions and no hardware. I called the seller and they could find no record of my purchase. :( After a trip to the hardware store and finding the instructions online it is finally installed. It wasn't difficult to put together. The steps are a bit steep as other reviewers stated, but they are fine. The handrail is a little wobbly, but not unsafe. I drilled additional weep holes on each of the side pieces and two under each step instead of filling with gravel as the instructions stated. It is staying put. No floating up. I purchased this on sale, so for the price I guess its a fair deal. I would have been disappointed if I paid full price.

Unit was very easy to install. Directions were decent. There were a lot of photos to clarify steps. I drilled the 1/4 inch holes the instructions suggested and the treads and risers filled with water very fast. The instructions said to add 10 to 15 pounds of clean gravel to each stringer. I added 30 pounds of sand in each and there was plenty of room for more. With the 60 pounds the ladder does not move at all. Adding sand was tedious the holes are small. I used a funnel and a gallon bucket to add sand it took a while but worth the effort. The only issue I had was the rear deck flanges. The directions say to drill a 5/16 hole and use a 3/4 bolt nut and washer to secure the upper rail to the flange. The washers are too big to fit into the area where the bolt goes. I installed without the washers and next time I am at the hardware store I will see if I can find some with a smaller outside diameter. The upper rails flex a bit but not nearly as bad as the A frame ladder I had prior. I think metal rails for the top would be better.