Question 1

How hard or easy is it to remove this plaster from a wedding ring set?  Very detailed wedding ring set........????

Accepted Answer

We worried about that, too. But in the first step of the process, you put your hands into a solution that turns into a rubbery plastic. It slides right off as you gently wiggle your hands (and rings) out of it. Any residue rinses off easily. You won't need soap, though you might want yo use it, anyway.The plaster doesn't enter into the picture until after you've made the mold and removed your hands.

Question 2

Would this be wide enough for two people to make a pinky promise gesture?

Accepted Answer

Yes, it will be wide enough; however, make sure to practice the position before making the mold.
The length of the bucket is 19 centimeters.

Question 3

I need to make a mold for pourable silicone. Will this work or would it stick to the mold?

Accepted Answer

I don't think so.  I wanted to use it to make soap molds and the company said it wouldn't work.

Question 4

Will this kit work for 5 kids ?

Accepted Answer

It should. Consider their ages. I would say the youngest should be 3 or 4 depending on how well the little one listens to being very still for up to 5 minutes. Do it at a table the kids can stand next to, or a surface comfortable for them to have their hands somewhat holding one another and perpendicular to the bottom.  I did it for 2 adult hands and a 12 and 10 year old. You want to make sure the kids understand to practice with their hand positions and once they dip down, touch the bottom and lift up about an inch. Then relax and don't move until it solidifies. Movement makes it less detailed though it still works. No scolding allowed. This should be fun and relaxed for everyone. Have them practice their hand positions, then dip them all down into an empty bucket prior to mixing the #1 Casting. Tap on the bucket to release air bubbles, then have them dip into this casting material. you can watch it set as the color changes. Then the adult  facilitating this should gently peel the alginate away from the wrists and starting from the middle, lift the hands out one at a time.  Once all the hands are pulled out, let the kids rinse off in a bucket. Don't have the stuff off their hands go down your drain. The facilitator should rinse the mold out several times with room temperature or cool water... using needle nose pliers or tweezers, pull out any thin layering of alginate that is just hanging out in the mold. This would just be trapped inside the casting and could cause mold to grow. Once all the loose stuff is rinsed out, place a bunched up towel on top of the bucket and tip it over to drain excess water out while you mix the white plaster. Be sure to keep a couple tablespoons of dry plaster for fixing any flaws later... mix the plaster, pour it in, swish it around, dump out, and repeat, swiftly, a couple of times. Then fill the mold with the white material. Tap the bucket several times to release air bubbles. Let set 3-4 hours but no longer than 5 hours. Then start demolding, pulling off the molding material a bit at a time, being careful not to tug at any fingers. I used a dental tool to clean out the cracks and crevices. Take your time doing this. Once all done, rinse with water. This next step is important. Dry in front of a fan for several days, rotating it periodically so it dries without mold forming on it. If you get mold spots, dab them with bleach to kill the mold. This kit for 5 kids should dry 3 weeks or so before sealing with a mixture of 1 part satin mod podge to 3 parts water. Let dry in between coats. I mounted it on a 12x12 base with E6000 epoxy which works like a charm. Have fun!

ASIN	B01NA77CNO
Age Range Description	Adult
Art Craft Kit Type	Hand Casting Kit
Best Sellers Rank	1,156,623 in Home & Kitchen ( See Top 100 in Home & Kitchen ) 3,727 in Sculpting Moulding & Casting
Brand Name	Luna Bean
Colour	earth tones
Customer Reviews	4.4 4.4 out of 5 stars (2,233)
Global Trade Identification Number	00742574085037
Included Components	Create-A-Molding Powder,Plaster Stones,Durable Reusable Bucket,Sanding Strainer,Demolding Rod,Demoulding Spoon,Detail Pen,Sandpaper
Item Dimensions	21.4 x 23.8 x 19 centimetres
Item Type Name	Hand Casting Kit
Item Weight	2.5 kg
Manufacturer	Luna Bean
Manufacturer Part Number	generic
Material Type	Create-A-Molding powder, plaster casting stone
Model Name	1305
Model Number	1305
Number of Packs	1
Number of Pieces	13
Paint Type	Hand Casting Kit
Product Style	Custom
Scale	Couples gifts
Seasons	All Seasons
Set Name	Luna Bean XL Family Hand Casting Kit
Size	Family XL
Special Features	Non-Toxic
Subject Character	Hands
Theme	craft kits
UPC	611138672184 742574085037 746264023422 746264054402 746264085437 746264079351 746264095283 738095489393 746264095382 742574096149 746264105289
Unit Count	1.0 count

Luna Bean XL Family Hand Casting Kit – Extra Large Hand Mold Kit for Families, Casts Up to 6 Hands – Unique Family Gifts Ideas, Parents, Grandparents & Keepsake Memorial

Details

Details

Description

Specifications

Common Questions