K&N Cold Air Intake System: Dry-Flow Air Filter, Increase Performance & Towing: Compatible with 2014-2020 Chevy/GMC/Cadillac Silverado 1500, Suburban, Tahoe, Sierra 1500, Yukon, Escalade, 71-3082

I've been a car enthusiast for years, and installing the K&N Cold Air Intake System on my 2014 Chevrolet Silverado was one of the best mods I've done. Right out of the box, the quality is evident – the high-flow air filter and heat shield are built tough, and the installation was straightforward with clear instructions, taking me about an hour in my garage. The real magic happens on the road. Performance-wise, there's a noticeable increase in horsepower and torque; acceleration feels smoother and more responsive, especially when merging onto the highway or towing my boat. It's like the engine breathes easier, delivering that extra punch without any lag. And let's talk fuel mileage – I've seen a solid 2-3 MPG improvement on my daily commutes and longer trips, which adds up quickly at the pump. Paired with the throaty intake sound under throttle, it just makes driving more fun overall. If you're looking to enhance your vehicle's performance and save on gas without breaking the bank, the K&N Cold Air Intake is a no-brainer. Highly recommended for any truck or car owner!

Easy instal. Sounds absolutely amazing. Looks bad ass. Solid build and more power.

Absolutely thrilled with the K&N cold air intake system! Installation was a breeze, and the difference in power and performance is immediately noticeable. My engine feels more responsive, gas mileage improved and the sound is fantastic. Highly recommend this upgrade for anyone looking to boost their vehicle's performance. Five stars!

Installed on 2018 suburban 5.3 v8. Super easy install. Everything is good quality. Sounds really good and can tell I have better throttle response.

Great install very clean and simple VERY noticeable difference!

Let me start off by saying that this is a very nice looking intake. Love the sleek black look, a bit more subtle than the spicy chrome version but enough to be something to step back and nod your head looking at it. When you get on the gas in gives you a nice growl. Not sure of the performance or mileage gains, but in my opinion it’s okay to admit that we like the way they look and sound, and I know for sure the performance has to be AT LEAST marginally better because we know that it’s breathing better. Only argument one could have is that the factory air box does indeed force the air to come from the inside of the fender well with a gasket that connects that cavity to the box. Once you install one of these, one could hope that it’s still pulling most of the air from that cavity, but it’s obvious that it will now also be pulling at least slightly more warm air from the engine bay. I would venture to guess that once you allow the engine to breathe better, then it will also benefit more from a tube than it would had it had a stock setup. Now for my two gripes. 1.) This Blackhawk was advertised as having this really nice polished aluminum badge welded onto the tube. This looked very clean and in my mind fit perfectly for what I had in mind for this truck. When a guy loves his truck and every detail matters, and you receive an intake with a fancy metal sticker instead of the welded aluminum badge you saw in the photos when you placed your order it’s a little upsetting. I probably would have bought it anyway, but spending good money and receiving something that isn’t EXACTLY what you were lead to believe it is is a huge pet peeve of mine. 2.) This unit is sold as not having any CARB OE exemptions and will not allow you to ship this to California. Having done my research there is indeed a CARB EO for this intake to be used in a 2015 Silverado 5.3. I assumed that since they were not allowing you to ship this to California that it would not come with a CARB OE sticker. I went through jumping through all of the hoops to ship to a friend out of state to have it shipped to me, and filed for a replacement sticker only to find out upon receiving it that there is a CARB OE decal included in the kit. Great product, but the seller should replace the photos in the listing with the photos of the item you will actually be receiving, and allow this to be shipped to California since there is literally a CARB OE decal included in the kit. Hopefully this helps somebody.

This thing is awesome! Works perfect! Sounds awesome! Didn't even mess with the computer. I put it on my 2015 Silverado and I think I have gained 20 horsepower. Love this thing! Sounds great with my dough exhaust

Instructions are very straightforward had no issues following them or completing the job. Absolutely no guess work. Filter is definitely huge and open. Highest of quality which is to be expected from a company like K&N. 0-30mph is where I feel like there’s the most power increase. Can’t speak much for fuel efficiency or gas mileage yet. With a tune I’m sure you could get much more and expect much more from the product but no tune is required and that’s why I purchased it. As a bonus it works on the 5.3 engine but the provide a coupler for the 6.2 engine/throttle body so if you have the 6.2 drop this bad boy in or if you plan to upgrade your throttle body and intake manifold to the 6.2 or already have this would make for a great addition to your set up and you should see substantial power increase with a good tune and exhaust. So wether this is your first upgrade or an overdue upgrade longevity of the product should be of no concern to you.

El sonido del v8 en su maximo esplendor, es irresistible ir en carretera y no darle un aceleron solo para escuchar ese monstruo

El sonido es muy diferente al filtro de agencia, mejor desempeño.

Added this to my 2018 Sierra... and I got better fuel efficiency and a more aggressive sounding engine. I install K&N filters on all my vehicles and this is the first time I installed an air intake kit. It was easy to do, and no regrets with putting this one in!

Installed on my 2016 gmc sierra 5.3L. Sounds and looks great! Very easy and quick instal. JUST ONE THING. The kit comes with 2 plastic vent fittings that are made of very cheap plastic. I broke one of them with my strong hand while I was snugging them up. I recommend you find a replacement before installation just in case... I found some on Amazon -- Stainless Steel 316 Barb Fitting Coupler/Connector 5/8" Hose ID x 1/4" Male. Otherwise very very happy.

I like the sound and the air flow that it gives my 2014 5.3 liter really like this product I’ve always used k&n the best out there