iJDMTOY No Drill Front Bumper Tow Hook License Plate Mounting Bracket Adapter Kit Compatible with Lexus ISF RC200t RC250 RC300 RC350 RC-F GS350 GS460 GS450h RX LS etc

I saw many reviewers complaining about this mount. That made me really think this purchase over. I have had this product installed for just over a month now and I have had no problems. I DID NOT USE the rubber washer in my install as that would only allow the mount to vibrate and come loose easily. Mounting the post into the tow hook hole is very straightforward. Mounting the metal plate to the post is where people might have trouble. My vehicle is a RC 350 AWD and I easily found a suitable hole in the plate to secure it to the post that did not interfere with any of the sensors. I used a #2 Philips screwdriver that fit the screw very snugly, if you use a worn screwdriver, you will have bad results. I have a strong mechanical aptitude and know how to properly torque a screw. Keep your car out of any car wash that is not touch less!!!

Everything worked out great. The key thing is, I did use blue thread locker to lock everything in even for the tow hook.not moved yet

Packaging was cheap. It was barely wrapped in sandwich wrapping. The black coating is cheap and was chipping off straight out of the package. Hardware is goofy & doesn't give me much confidence putting this on the front of my vehicle. Decided to put this awful thing together and it actually doesn't even come close to clearing the arch of the big lexus grill. It needs at least another inch or an inch and a half to clear it. I think I screwed in about 2 threads before I noticed the back of the bolts chewing away at my grill. I mounted the post 1st to re-try installing and I had to warp my license plate like a banana. Don't buy this for your RC or IS it should NOT be recommended.

I like the holder on my 2008 Lexus RX350. Hated the idea of putting holes in the bumper for a traditional frame.Mounting was super easy and it looks good.My only complaint is that the design makes it easy for the frame to twist around the post/screw. There is one screw that attaches the frame to the post. They give you a rubber washer, but this does not keep the frame from twisting. Usually this is not a problem, but I bent my plate when I went through an automated car was. So just be careful going through car washes. :)

I placed this on my 2015 Lexus IS350 and everybody in the office was so surprised to see my car with it. They find it very appealing, though they admitted it was very rare that they see it like that. I have to admit that it is not as sturdy as I expected, the license plate has the tendency to rotate since it's only supported at one side but overall I am satisfied with this purchase. I purchased this to avoid drilling holes through the grill of the car.

Sticks out way to far, need to trim it down close to 2.5 inches to be a good length, also gonna need loctite

Easy to install and a month later still holding up fine. It does spin quite easily especially when wet, but holds position when I line it back up. I'm completely satisfied with this purchase.

Perfect! Exactly what I wanted and looks amazing