🚀 Upgrade Your Drive with MOOG's Magic!
The MOOG CC501 Coil Spring Set is engineered for durability and performance, featuring 100% load testing, easy installation, and a design that minimizes stress for a longer service life. Say goodbye to sagging springs and hello to like-new steering and enhanced vehicle alignment.
A**M
Didn’t install. But I’m.m
I didn’t install them I put the air springs back in my 2005 Grand Marquis Ultimate LS. Lowered the front two inches but instead of these coils that will lower it two full inches I used my air springs. I can adjust those. Didn’t wanna be stuck with two full inches of drop. Yeah I knowI’m a genius. LolUpdate 5/13/22I think I need to install them. My air springs set at a low level don’t have much air and I got a clunk going on. I can install those aftermarket airbags that go inside of these if it’s too low. Also bought 1” lift spacer too. Not sure which route I’m gonna go. It’s a kinda of a pain releasing the air springs too. Then I gotta install the lowering spring and If it’s to low pull them and add the spacer.9/16/22Installed on my 05 Grand Marquis. It only lowers the MGM 1.5 which is good. I have some 1” spacers I’ll use with them. Thought about trying the Air lift bags the ones that go inside the coil. That way I have some control over ride height. As for the ride quality it’s good. Motorcraft P71 shocks with them. These are not designed to be support lowering springs so the 1” spacers should improve the ride.11/2/22CC501 are in with 1” spacer and motorcraft police interceptor shocks. Rides real nice.
S**N
Fits my 08 crown vic
Fits perfect on my 08 crown Victoria. I wanted about a 2 inch drop and I was satisfied.
R**H
Great price great turnout
I installed these springs in the rear of my 1971 Pontiac Grand Prix they lifted the rear of the car perfectly
R**.
Good Quality
Great fit
J**R
Yep, fit my 05 vic to complete the bellfire drop
Yep, fit my 05 vic to complete the bellfire drop. Rear springs were easy to get in. They dont fall out either. Rides great
B**.
Crown Vic lowering springs
These lowered my crown Vic/ Gran marquis in the rear 2" exactly what I was looking for. Ride like factory. Get these if you want to lower the rear of your car
J**E
Great to lower Ford Motor Company Panther platform rear suspensions
Heard these would work to lower the rear end of my 2010 Mercury Grand Marquis. They were much easier to install than the front springs and lowered the rear about 1.5". The car looks better and I can't say I notice any increase in ride stiffness. If you can't go the coil over route, get these and a good set of mono-tube shocks.
C**5
Perfect ride height
Had Hotchkis 1” lowering on all four corners. Rear sat a bit to low and rocker panel parallel to ground. Wanted a slight rake and these did the job. Similar lb/in2 as the Hotckis but rather than having a linear compression these set at stock height and get stiffer as you lean into them. Gave car the rpslight rake I prefer.
Trustpilot
1 week ago
2 weeks ago