Dorman 742-143 Power Window Lift Motor Compatible with Select Models

Installed last night in my 03 S10. For one mounting hole, I was able to use one of the supplied bolts and nuts. For another, I had to get a longer bolt to screw into the rivnut since the housing is thicker. For the last hole I had to use a zip tie because of the regulator arm moving behind that hole. I suspect that there was originally a rivnut there as well, but it's missing. Go figure on a 23 year old truck. There was a zip tie holding it when I took the panel off and I've had the truck 5 years, so it must work good enough. The motor itself works great so far and fits the same as the original apart from me having to be creative with the mounting. It does include the correct connection to make it compatible with the original. This was certainly easier than replacing the entire regulator and motor.

This is the second motor I have replaced on my 1998 S10. First was the passenger door motor 10 years ago, and more recent the driver side door. Takes a bit of work to replace. Original motors are riveted in place and must be drilled out. Also, I recommend getting flush head bolts to replace the rivets. In the S10 the space between the motor and the regulator is a few millimeters.

Used to replace a failed unit in my semi, worked great and it's way faster than the factory unit was. Fits a plethora of vehicles.

Good

Great window motor. Easy to install. Will recommend. It had all the accessories that you need to get the job done

very nice and easy to put in

This window motor was an exact replacement for my truck. Easy to tell that quality was in this product. Operated flawlessly upon installation. Great speed in raising or lowering window. Value as priced is incredible!

I used this motor on my 2001 Chevy Blazer driver door window, along with a new regulator from TRQ. This motor fits just like OEM. Comes with a connector that will work with this new motor and the stock connector from the door. Fits absolutely perfect, and works perfectly and powerfully! This kit comes with 3 long nuts and bolts you’ll need to mount this motor onto the regulator, and it also comes with 4 short nuts and bolts that you might want to use to mount the regulator to the door sheet metal. I just used 1/4 inch rivets for my regulator instead of the supplied nuts and bolts. Great product!

had no issues work out of the box thanks