MOSTPLUS Power Heated Towing Mirrors Compatible for 02-09 Ram Flip Up Left Right Pair w/Arrow Light and Turn Signal Light (Set of 2)

For starters, these things look awesome compared to what was on there. Once I got them installed and wired in properly, everything worked as it was supposed to. The added bonus: not only does it have turn signals, but also puddle lamps! Wasnt in the product description, so that was a nice surprise. Like many other posters have said, the bolts for mounting them tend to be way too long. I had to use a hack saw to shorten them. The bolts are threaded in both ends, with one end having a 1/4 inch top that I used to tighten them up. However, there is about an inch in the middle that doesnt have threads. I used washers to be able to tighten the nuts, and it took several. However, outside of that the install wasnt bad. I watched a couple of YouTube videos that included mounting and wiring. The factory harness for the power and heated mirrors for fine. No instructions, so I had to check the wires to see which was the turn signal and which was the puddle lamp. The blue wire was the turn signal and the white was the puddle lamp, in case anyone is wondering. The controls work fine. Even when I rotate then mirrors up for towing, the controls work correctly. Some have written that theyvare backwards when turned up, but I havent had that problem. Overall they look great, everything works. The manufacturer should just include shorter mounting bolts that are threaded all the way.

Overall they look great and they don’t shake going down the road. My only issue is the same that some other reviewers had with the studs. To remedy this all you have to do is reuse the studs from your old mirrors, we did end up having to you 1 m6 bolt in place of a stud that would not come out but it was not a big deal. Love the fit and finish otherwise and they are bright!

First off I love these over my factory 3rd gen Ram mirrors. They work just fine, although they have a couple issues. For one the studs that come with them don't seem to be able to thread in and they're also too long. I opted for stainless bolts and they've been doing great. I don't remember the size because it's been almost 2 years. Recently the passenger side turn signal lens cover came off while driving and I never got it back, and the driver side one is about to come off as well (if the seller could send replacements I will upgrade this review to 5 stars). Those are the only real issues, they still work 100% fine.

I have had the mirrors since November and it is now nice enough to install them. I only installed one on the drivers side but after a test run I couldn't adjust the mirror to raise much past the top of the bed (no where near the stock mirrors).Also, the convex mirror is not positioned right and I had to lean forward to see what was next to the truck.It is to bad that I had this problem because I liked the signal light setup and the are easy to install.

Works well out of the box. You have to run a separate wire to make the blinker function work, which wasn’t listed in the description when I bought these. They work fine as regular mirrors even without that extra wire, though. Good value for the price.

Went through a carwash and the corner covers for the blinkers fell off they are glued in and the leds are a plastic flexible strip glued under there not replacable with stock blinkers of the covers

Great upgrade from OEM for 3rd generation Rams. Only issue I had was I had to shorten mounting bolts in order for me to close my doors. Had an issue with one mirror and seller sent me a replacement mirror without issues.

Bought mirrors for my truck, said this item fits my year truck. They came to me in chrome (which nowhere did it give me the option to choose chrome) and the connector didn’t even resemble anything remotely similar to OEM.