Alconox 1404 Alcojet Nonionic Low-Foaming Powdered Detergent, 4lbs Box

I use this product as part of "The Ultimate CPAP Cleaning Kit." It's extremely easy to rinse, leaves no residue, does not have a strong odor and of course is highly effective. My manufacturer, like most, recommends using baby shampoo as a daily cleanser. However, I disliked the perfumes. This is almost odorless. Another added benefit is it's non-ionic property - making it compatible with most disinfectants.Other items you might find helpful:AG Industries CPAP Tube Cleaning SystemDeluxe Flexible Stainless Cpap Tube Cleaning Brush (Slimline)Rubbermaid Commercial Plastic Food Storage Container Lid, Round, Yellow 4 QuartRubbermaid Commercial Products FG572024CLR 2-Quart Round Storage ContainerRubbermaid Commercial Plastic Food Storage Container Lid, Round, Yellow 8 QuartRubbermaid Commercial Round Storage Container, Semi-Clear, 6 Quart, FG572324CLR1 X Steramine Quaternary Sanitizing Tablets - 150 Sanitizer Tablets per bottleCleanSmart Daily Surface Cleaner, Home Use and CPAPs. Kills 99.9% of Bacteria, Viruses, Germs, Mold, Fungus. Leaves No Chemical Residue!!! Great CPAP cleaner, CPAP sanitizer. 23oz, 2PKCleanSmart To Go Disinfectant. Kills 99.9% of Viruses, Bacteria, Germs, Leaves No Chemical Residue, Contains No Harsh Chemicals. Great to Clean CPAPs, Disinfect CPAPs. 2oz Spray, 3pk Travel Size

I use Alconox for glassware in my Chemistry lab and it does such a good job there that I wanted it for my dishwasher at home. Superb product!! I used it on my silverware since it was looking a bit dull from the dishwasher and it came out sparkling and looking like new. Same with glasses. Spot free and sparkling!!!! Worth the money, although I certainly wouldn't use it EVERY time I run the dishwasher.

it's very efficient Detergent for our Fuel sampling bottles washer; we have been purchasing same item since years without any hassle.

It didn't work well in our in our jetted tub. There were too many bubbles when we tried to clean it.

Product works but just not very well for my needs. It doesn't penetrate or break-up fuel and motor oils on my carburetor cleanings; still have better luck just using Dawn Ultra dish soap in the respect.I was hoping that the higher pH12 mix would do better than the neutral Dawn mix.So anyone with oily cleaning needs I would not recommend this product.

If you are disappointed with the performance of modern phosphate-free dishwashing detergents, give this a try. This does contain phosphates (8.7%), so it will work like you remember detergents working before phosphates were banned for environmental reasons. I was sick of my dishes coming out with a film and even the most expensive quantum dishwasher detergent didn't take care of it. I'm familiar with Alconox products in the lab, they always work well so I decided to buy myself a box for at home. Yes, it's more expensive, but it will be worth it when you have clean dishes again! It worked very well for me, as I would expect from an Alconox product. Alcojet does contain an organic chlorine ingredient, so you may notice a little bleach smell. It's possible this may dull or damage painted dishes over time, so use with care. For sensitive items, I use a traditional detergent and add some TSP powder (phosphate) as a booster.For dishwasher usage, I would recommend you use one tablespoon per load and adjust +/- from there. If your dishes are mostly clean and you have soft water a teaspoon may be plenty. If water spots are a problem after using Alcojet, you may also want to try using their Citrajet product during the final rinse as an acid wash. You can add it manually during the final rinse or fill your rinse aid dispenser (it's possible Citrajet may damage metal parts in your rinse aid dispenser since it's corrosive, so use at your own risk). Otherwise, you can periodically put all your (otherwise clean) water spotted items in the dishwasher, fill the detergent cup up with citric acid powder, and run a cycle. Citric acid may tarnish some metals FYI.

I use this in a heated parts washer. It works good. Even under high pressure spaying, it doesn't foam, which is really great. I use it in a 1% concentration. I have found that it doesn't remove oil too well unless the solution is heated. I also use it in my ultrasonic cleaner (Crest 1200 watt) , 1% solution at 175F. It removes dried dirt well, but I have found it less effective at removing oil soaked dirt coatings or grease than I thought it would be. It does remove oil films readily, however.

This product arrived broken open with powder leaking from the package.