Fibaro Implant Z-Wave Plus Universal DIY Adapter, Smart Tool

Takes a bit of skill and time to set up and configure but works reliably with a z-wave system. was bought to replace its predecessor which was z-wave (not z-wave-plus). Didnt want to buy it but it was the only way to obtain a replacement devices to work with a more up to date z-wave controller.

It works great with Hubitat paired first time and works great used to integrate my smoke alarms into my smart home with Hubitat used in HSM with a virtual smoke alarm now I will get alerts to my phone it is goes off if I'm not at home. If I am at home the house goes crazy doors unlock lights turn on and Google starts shouting as well as the obvious fire alarm sound. I then added 5 DS18B20 Temperature sensors which was abit of a struggle as I didn't realise they needed to be added before the device was paired, once I removed and repair they were found. Now I monitor my hot water tank temp and showers, which mean that now my hot water heating is smart and automatically turns on of there's not enough winner all from one device love it. I've just purchased another to work with the smoke alarm in the garage and monitor my solar battery temps

The Idea of using this to replace two devices in use with my DIY Central heating Automated control. I currently have Fibaro Duel relay module mains powered for switching on signal to the burner and control of the 3way valve for HW/BOTH/Heating plus Fibaro multisensor for the temperature sensing using cheap DS18B20 single wire (data) temperature sensors for measuring temp. of flow in/out pipes and the tank water temperature with a 12v wall plug DC supply. This bit of tech replaces both of these in a tiny package and only uses a 9-30v DC supply. The relays contacts are only exposed to signal level /small motor in the 3way valve so are perfect and the built in control / reading of upto 6 Temperature sensors (which can be a long distance away)

Amazing little device, used with Smartthings to provide remote control of conventional wired house alarm. Can Set, Unset and trigger alarm remotely either via phone app or via an automation in Smartthings.

I use this in conjunction with an RG-11 rain sensor and works a dream! Also use these with some magnetic sensors for my garage doors and trip beam for my drive and has never let me down!

Works perfectly as Garage Door Opener / Monitor

This unit is worse than its predecessor the universal module. Homeseer doesn't detect is correctly. If you add in in unsecure mode, you'll get both inputs but no temperature. If you add in in secure mode, you get temperature but only one input. Fibaro are the usual helpful selves and not offering any firmware outside their own hubs.

After quite a bit of work, I got this to connect to Smartthings. Pretty impressed what this little device can acheive! The response time is half the time of a Mimolite. I use mine for an Infrared Detector connected to Smartthings. I used to use a Mimolite, which was fine but took 10 seconds to send the signal through the ST Hub to my phone. This little thing does it in 4 seconds... Impressed

Prodotto molto versatile e utilissimo. Nel mio caso ho dovuto solo comandare un cancello lasciando l'altro relè libero per usi futuri. Non collegate mai il carico da pilotare direttamente al modulo, utilizzate una soluzione con un relè esterno.

La doc (à télécharger) est atroce pour comprendre les différents montages possibles mais a part ca, marche super bien. Je l'utilise pour mesurer la température de l'eau de la piscine et contrôler le variateur de fréquence de la pompe de piscine via des fils de commande. Faites bien attention à la tension maximale sur les contact secs (out1 et 2) au risque que le courant passe quelque soit l'état de l'interrupteur. (la sonde de température intégrée nécessite un offset assez important pour donner des résultats réalistes)

The product description does not show that Z-Wave frequencies are "country specific". This product is configured for Europe (868 MHz). Do not purchase if you intend to use this the USA. Good luck trying to find a USA configured (908.42 MHz) version. Amazon needs to either update the description or remove this product for purchase.

Funktioniert Einwandfrei. Kann ich uneingeschränkt empfehlen. Unbedingt die Anleitung kpl. durchlesen.

Es un dispositivo increíble pero... si todo funcionase bien. En mi primera experiencia, la "pareja" IN1-OUT1 no funciona y hasta descubrirlo nos ha hecho perder mucho tiempo. Intentaremos que nos lo cambien. gracias