70MM Ball Catch Omitfu Set of 5 Solid Brass Chromium Plated Adjustable Double Ball Tension Roller Catch Latch Hardware Fitting for Cabinet Closet Furniture Door with Screws

I used one of these as a catch for an external screen door. It holds firmly, but is still easy enough to open and close except maybe for a small child or frail elderly person. The tension can be adjusted a bit, but the useful range is close to as far out as the threaded caps can be set without threatening to pop out. That is, you can make the catch very tight, but not very loose. The catch appears to be well made. I am using it to replace several iterations of cheap thin metal spring-and-plastic-roller catches that would rust and snap off. We'll see if the weather affects this catch in some other way; it might eventually need a little oil, for example, but it certainly won't rust (at least the brass parts won't) or break easily. The two parts have to be accurately aligned to close; there is a range of probably only plus or minus 1/8" within which the door part will be guided into position between the two balls of the latch. If the door is very flexible or saggy, or the hinges are very loose, then the user may have to pay a little attention or jiggle it a little to get the two parts to fit together and close. I don't find that to be a problem.

I bought these to secure my cabinet doors in my tiny house while I am towing it around. So far no issues, but I'll update if I do. Easy way to install these: 1. Loosen both of the tension screws on the stationary (female) part of the lock (1/2 to 1 thread remaining in contact with the female part) 2. Figure out where you want to place the stationary (female) part of the lock and screw it down. 3. Apply double sided tape (15 lbs worked just fine) to the backside of the male part, and connect the two parts together (consensually ( ͡~ ͜ʖ ͡°) 4. Close the cabinet door and apply pressure, then slowly open the cabinet door. The male part should be attached to cabinet door. 5. Close the cabinet door once more, but this time slowly and ensure that the male part is going where it needs to (it could be off center, so double check before you screw it down. 6. If it's where it needs to be, use and awl or knife point to poke directly in the center of the screw slots. 7. Remove the double sided tape from the male bracket and screw it down with a screwdriver or a drill on the lowest setting (You might have to adjust your clutch settings).

More like solid brass plated pot metal. They look great and work fine if you don't bend them. (even a little) Brass bends, pot metal breaks.

Holds our drawers in our camper van perfectly! Nice that one side of the latch can be installed sideways(but be sure to get which side as it only works one way on a side- mount). Nice that tension can be adjusted perfectly. So strong, we only need it on one side of the drawer. Nice quality. We also think it will replace our bin latches, too, when the plastic spring latches break. Thanks for quick delivery!

Installed on our motorhome cupboards. They would randomly open around turns . The adjustable feature is great. They snap shut and rarely open on the fly. Installing was kind of a pain because they need to be lined up really close to work.

Almost a perfect fit, but unfortunately holes didn't line up for the China cabinet I wanted to install these in. I could make new holes, but the holes seemed too close to the old hardware's holes so I didn't want to chance it. Still, I can tell they're a quality product and as long as you're drilling new holes or they fit the spacing of the current holes in your cabinet, they're a great price for hardware these days and great quality. There's no way you'd find them this cheap at a big box store.

Using for a smaller roadside farm stand's doors. Exceptionally well made. The clicking connection is inspiring. The doors are vertically hung and light weight so I cannot say how much stress these can take but way superior to anything from local stores. Just get HD screws bec. tons of reviewers mention that they strip out easy...

Works really well, but really hard to install. If your not really good at this kind of thing I wouldn't get it, it has to be installed perfectly.

These can be adjusted for just the right tension to hold RV doors closed on those tight turns. I would recommend these 50MM Ball Catch Omitfu Set of 6 Solid Brass Adjustable Double Ball Tension Roller Catch Latch Hardware Fitting for Cabinet Closet Furniture Door with Screws 100%

These work great in our converted skoolie, you can adjust the tightness on them. Really happy! @claysanabus

Way better than the one i replaced. Solid. Tough to blind install, i used lipstick to get an imprint for the second piece.