ODI V2 Rogue MX Lock-On Grips

CRF125に使用しました。ノーマル品よりもグリップ素材が軟質で、振動をある程度軽減させてくれます。 ただ、軟らかすぎてべたつき感も少々ありますが、グローブをはめているためあまり気にならないかも。 アクセルスロットル部は5種のカムが付属するため、多種のバイクに対応できるようですが、CRF125ではジャストフィットが見つからず、一番近い形状のカムを使用しましたがスロットルワイヤーに数ミリの遊びがでた状態です。これで普通に走れていますが、カタカタした感じが残りました。

エンデューロで使用してます、これはいいですね、リピート決まりです、豆もできなくなったし腕上がりもかなり軽減されました

These grips are a major improvement over stock and even offer noticeably more cushion than ProTaper Pillow Tops. I went with these for maximum vibration damping and ease of install, and they delivered on both. The added diameter and soft compound really help reduce hand fatigue on longer rides. What You Get: - Left grip with internal clamp (clutch side) - Right grip with integrated ODI throttle tube - Multiple throttle cams for different bike models Installation Steps: 1. Remove old grips: Use a utility blade or compressed air to remove the stock grips. Clean off any glue or residue from the clutch side. 2. Install Clutch-Side Grip: Slide the ODI grip onto the bar. It’s a precision fit, no glue needed. Rotate to preferred position (usually with the “Rogue” text facing outward). Use the included clamp and allen screw to tighten the grip to the bar (about 3–5 Nm). 3. Install Throttle-Side Assembly: Remove your stock throttle tube. Select the correct ODI throttle cam for your bike. Snap the cam onto the ODI throttle tube and feed the throttle cables into the correct grooves. Reinstall the throttle housing and check for free throttle return before tightening completely. Installing Handguards/Sliders with ODI Grips: - Do not cut off the entire grip end. Instead, use a sharp utility knife or X-Acto to carefully score and remove only the inner plastic plug to make room for bar-end hardware. - Slide the grips onto the handlebar (throttle side only if clutch side handlebar have knurling). - With the grip fully seated, firmly tap the grip end against the bar end to punch out the cut plug. - Trim any excess material for a clean, flush fit with your handguard mounts. - Leave a small gap between the throttle tube and the bar end to prevent binding and ensure proper throttle return when mounting handguards. Tips for Best Fitment: - Don’t overtighten the clamp bolts, strip-outs happen fast with small threads. - Ensure there’s a small gap between the grip and the bar-end/controls to prevent friction. - Double-check your throttle return, should snap back clean with no drag.

Great. Perfect fit. Fast delivery. First dat for delivery was shocking end of October. But it was faster then that😉😉

I put these grips on everything. Like Franks Red Hot. No matter what you're riding, Franks Red Hot will make it spicier and more delicious. Wings, Hogs, Ricers, it don't matter. I want to put these grips on a bottle of Franks Red Hot so that i have comfort and control while dispensing the sauce. Best Grips on the planet.