Meguiar's Professional Ultra Pro Speed Compound M11032 - Heavy Duty Compound - Pro Scratch Remover, Oxidation Remover, Heavy Swirl Mark Remover and Car Polish - Ideal for DA Polisher Use, 32 Oz

Works great on cutting and buffing new clear coat paint.

Awesome product, worked great on my finish

Meguiar’s M11032 Ultra Pro Speed Compound is a total lifesaver for restoring your car’s finish. It cuts through swirls, scratches, and oxidation like a champ, leaving behind a smooth, glossy surface that’s ready for polishing. Even better, it’s super easy to work with—spreads evenly and wipes off without a fuss.This compound is perfect for both professionals and DIYers. It’s aggressive enough to tackle tough imperfections but gentle enough to avoid overcutting. Paired with the right pad and buffer, it works fast and delivers stunning results, saving you time without compromising on quality.The 32 oz bottle is a great value, and a little goes a long way. Whether you’re refreshing an old paint job or dealing with stubborn defects, this is the go-to compound for pro-level results at home. 🚗✨

I recently repainted the black hood of my car (bc/cc). First, I wet sanded from 1500 to 3000 Trizact, then proceeded to buff and polish.I've been using the 3M perfect-it system for years but for this project, decided to give the new Meguir's Utra Speed system a try.I used a combination of Meguir's M110 and M210. These are designed to be used with dual action and/or rotary polishers.For the first pass, I needed it to be bit aggressive, so I used a Devilbiss rotary buffer, attached an orange 6.5" microfiber cutting pad and used M110 Ultra Speed Compound. I made the first pass in 2 sq ft sections. After this pass, wiped off excess with micro cloth.I then switched to a dual action (DA) sander and attached the same 6.5" microfiber cutting pad and continued to use M110 and did another pass. I feel the second passes using a DA helped to rid of possible swirls early in the process. After this pass, wiped off excess with micro cloth.Next, I attached a Meguiar’s 6" DA Foam Polishing Disc (yellow) to the DA and used M210 Ultra Pro Finishing Polish. I ran passes as before, wiped off excess with micro cloth, and that's it.The results were phenomenal - and so easy to obtain. I understand the new Meguir's Ultra Pro system utilizes new technology. It truly is pretty much dummy-proof. I simply applied the material, buffed or polished with no pressure. The remaining material wiped off easily and left behind an amazing deep shine. To me, this was much easier than the using the traditional 3M I've used for decades.I was very impressed and highly recommend to novices, hobbyists, and professional detailers alike. Good stuff.

Good product

Whether D/A or rotary you get a great cut with this. Proper quality pad cannot be overstated. I initially used with both a Meguires microfiber cutting disc with an interface pad on the D/A and a Lake Country purple wool on the rotary, both on pretty severe RID's and 2000 grit sanding scratches on black with clear coat. Lots of dust, but a great work window. Season your pads well and use enough, not too much, and the results were terrific.

Makes it shine!

If you’re thinking about buying this product stop thinking and buy it. It cuts through oxidation quickly with minimal dust. Cleans up and micro scratches and swirls. I recommend using a rupes wool pad with the 110. Also got the 210 to polish and finishing it up with hi tech yellow wax 26. All Meguiars products. Don’t cheap out on the pads get some quality ones and you won’t regret it.