Copenhagen All Wood Platform Bed Frame, Queen, Black

All the holes in the parts aligned properly and everything in the assembly went smoothly, BUT for one part.Although all the other parts seem to be of decent quality, the company decided to use the CHEAPEST wood screws it couldget, that is the small wood screws that attach the cross-boards to the frame.As a result, with the slightest slip of the screwdriver their heads immediately got busted before being able to screw them all the way in.I had to pull out many of them with a pair of pliers. I ended up going to a hardware store and buying a batch of better-quality screws.After that, assembly was fast and easy.My advice is to get a batch of good quality wood screws, 6 X 3/4'' in size, from a hardware store (will cost a couple of bucks), and use those instead.Otherwise, for the price, this is a fairly good product.

I wanted a cheap platform bed frame and that is what I got...it was super easy to put together but definitely recommend a power screw driver with all of the drives as that will cut down on time tremendously...I did it all by hand with the small allen wrench and my trusty screw driver and it took an hour to do but very labor intensive...I have read all of the bad reviews and I am hoping it holds up to the test of time...the wood used for the planks are not very strong...I am going to measure the whole bed and place a full piece of board for more stability

Like the design, but mediocre quality control. 1. Sent the wrong product--ordered medium oak queen and mahogany king sent. 2. Foot rail misdrilled and mismarked, causing one end of the rail to be higher than the other. 3. Way too few lock washers of correct size, way too many of lock washers that did not fit anything in the package. 4. Center rail support (good idea, this) is not marked separately-spent ten minutes searching and finally found a slat that was drilled just a bit differently than the cross slats, from which I inferred it was meant to be the center support rail (if it looks 99% like a cross slat, please obviously market it as the center support rail). 5. Some nicks and gouges in end posts.

Looks great, but assembling it was painful. None of the screw holes aligned. I had to file down the bracket holes just to make the corners fit. And of the 4 legs three of them didn't fit; I had to drill new holes for them.Edit: I've had this for a while now and I absolutely regret buying this. Along with everything stated above. The 3 smaller support legs in the middle are terrible. After a few weeks they broke off and I had to fix them weekly. The screws that connect them to the center support rail are super short and the wood is so weak the screws just break out. Without all the support legs there, the flimsy wooden cross slats cave in so much my bed would sink and caused serious back pain. Total nightmare. I removed the support legs and replaced them with 3 paint cans, which happen to be the same height, to support the frame and it's a million times better now.

Was time consuming a bit challenging to put together. Plus, it's several inches too wide and long for my king mattresses and box springs. The head board I bought can't attach to it due to the fact that the frame is too wide. Other than that, it is a very attractive frame - nice height, nice finish, seems sturdy.

Get what you expect for the price. Nice style but false advertising because it is not the actual wood as advertised, it is bamboo finished in different stains. Shipped without primary bolts, but company quickly sent the replacements. The small screws which hold the slats are of very soft un-tempered metal so even with the correct phillips size, the heads are stripped before finishing screwing the screws. I'm a professional engineer and a licensed aircraft mechanic, so I know what is appropriate for fasteners. The middle leg broke off within a week and this is with very gentle ingress and exiting the bed since. I do like the style. I wish the legs where about 3 inches taller... so hopefully version 2.0 will have a beefier middle leg, all legs about 3" taller, and better quality screws. Changing to 1 star as it has not held up over the years; slats sag a lot

You get what you pay for. It’s cheap so it feels cheap. VERY noisy bed.

The bed was ok to assemble was missing a screw, but was able to get around it. The middle post is not strong and became very lose and after few weeks we had to go buy block of wood to support the middle since the wood is very heavy.