Pyle Adjustable Laptop & Projector Tripod Stand, 74 - 132 cm

I bought this stand to support a laptop and it does the job perfectly. The stand is well made and sturdy, easily adjustable and can be folded for easier storage. It came well packaged and was easy to assemble. I have no hesitation in recommending this stand.

Really solidly built, functional, great innovation with the tripod legs as they expand with the height change. Thanks to other reviews, I had a small hammer and block ready to tap out the platform bolt to fit it. Very simple to do. I bought this to use with the indoor bike trainer to hold the laptop for Swift. So it's perfect and very adjustable and packs away tidily. The only drawback is my old laptop is very wide with a curved base so is overall wider than the 35cm wide platform. But this is easy to remedy with a soft tile under it as it's remaining level in use Considerably cheaper, more versatile and compact than a cycling specific table. The stand is very safe as it's weight keeps it stable with a wide base.

Seems good quality and does what it should

Works well for us to support our Optoma projector. Just the right size for it. It moves when we touch the table, but OK for us as we tucked it between the 2 parts of our L-sofa. Actually good if we want to adjust the projection left or right. Have had it for a few months and never had any fall (but no children in the house, only seniors!). Only moves if we touch it. Happy with it.

High quality, especially considering the price. Easy to assemble and easy to adjust. I use this for keeping my laptop at a more comfortable height during video calls. Comfortably holds a normal-sized laptop. A tip for assembly; don't tighten the nuts that fasten the bracket to the stand fully until you've got everything lined up.

We spent a lot of time looking for the most useful variable height stand and this has proved to be an excellent choice. The tripod legs made it very stable. It has a remarkable range of height adjustment (from 80cm up to 128.5cm) - great - I'm tall but my wife is short! It is light weight - so easy to move or, when packed up, easy to transport eg to use as a lectern to give a talk. The shelf on top (40x50cm)is flat which we prefer to one with an edge because we can fix a larger board on top for jigsaws etc. You could always clip an edge on if you need one. It rotates through 360 degree and tilts from front to back but not from side to side. It is made of a hard plastic with an orange-peel effect on top so should be very hard wearing. The stand looks functional, utilitarian, perhaps even industrial. I like this but I know some people will want a stand that looks more like traditional furniture.

This is a solid, stable and portable piece of kit which has an adequate extendable height for a standing desk for a laptop. I would have liked to give it 5 stars but cannot for four reasons. First, as other reviewers have said, the table top tilts in the wrong direction, both in terms of the position of the tripod legs and the ridged surround of the table. Second, although the height can be adjusted incrementally, the safety peg which secures the stem only has a limited number of holes. Third, the absence of instructions on securing the table top - without the guidance of other reviewers I would not have worked out how to remove and reinsert the axle (a process requiring brute force and a hammer to get the axle back in place). Finally, it is not possible to register for the life-time warranty because you have to provide a product code or an order number and neither are provided via Amazon. Moreover, the search function on the Pyle website does not find this projector stand, so you can't identify it through that route either. If Pyle would like six six stars, then make one which corrects these deficiencies and offers a gas piston. By the way, packaging and protection was minimalist - why? Other reviewers have commented on this too.

DOES WHAT IT SAYS ON THE TIN. SIMPLE TO ASSEMBLE AND PRETTY SOLID CONSIDERING ITS PRICE.

Needed a lightweight yet sturdy stand to keep my Maschine MK3 (part of my home studio setup). After searching for sometime, found this one in Amazon. To be honest, I am pleasantly surprised by how beautiful this stand is, at this price point. Not only is the build quality very strong, the overall look and feel does not feel cheap at all. Assembling it was a charm, and I did not need any tools for putting it together. It took me like 10 mins max to fix it. To me, the only negative point that may have a complaint from others is that the edge of the tray is super thin, and if anything is kept at an angle, it may slide off and fall. However, for me, it actually came out as an advantage as it helped to lock my Maschine in place. Really happy and highly recommended.

Die Installation war schnell und einfachLediglich einige Schrauben mit Muttern verbinden. Die Höhe ist einfach zu verstellen und der Ständer macht einen soliden und zuverlässigen Eindruck. Ich habe es mit einem Beamer ausprobiert. Ich kann eine Empfehlung aussprechen.

**One thing to address before I get into my review. The negative reviews I've read concerning attaching the top plate/tray to the stand are, frankly, bogus. The screw is not welded in-- but it is firmly in there. Simply unscrew the thumb screw all the way off and tap the screw to release it. You might need to use a mallet or smack it with a wood block but it will come out. Then negotiate the top plate into position and reinsert the the set screw while being careful to keep the washers between the two halves. Screw the thumb screw back on, adjust the tilt of the plate to taste and tighten. Pyle probably should have included better instructions but they probably assumed customers would be a *bit* quicker on the uptake. Now for my review: Impressive stand. The metal poles are over an inch in diameter and the footprint if you fully extend the legs is nearly 30 inches (though you don't need to operate it that way). Suffice to say this stand is extremely sturdy and unlikely to tip over even if someone knocked into it. The plate up top is fully metal and not the plastic piece you find on most competitors. Height is not continually adjustable but adjustable via a cotter pin secured to the center pole by a canvas strap. Lowest height is roughly 35", then 42.5", 49", and finally 55.5". This will disappoint some but the cotter pin means this will hold a lot more weigh without risk of slipping. There is a lot more play/slop at the top height setting so I would recommend this at 49" or below. Laptops and smaller projectors won't cause this stand to break a sweat and the Pyle confidently held my 15 lbs BenQ X3000i which is not something I can say about the Innogear I bought alongside. About that: I bought the smaller tripod after I realized the Pyle might be too tall for my purposes. The Innogear is plenty sturdy for being so small and light but is somewhat let down by it's plastic tray table. It flexes and warps easily and I don't have much confidence in placing a projector much heavier than 7-8 lbs on it. Ultimately, I highly recommend the Pyle if it's size/height meets your requirements. You won't find a better tripod projector mount for the money (literally-- Amazon sells 'basically' the same thing for 50% more). The metal tray table and wide stance alone make this a winner versus the competition. I wouldn't try and balance a JVC on there but it should work for reasonably sized projectors 20 lbs or less.

I needed something that was going to hold the weight of a 27 inch monitor behind my music keyboard. I first tried having the built in music stand hold it, but it was too flimsy. Then I found this little table. It's perfect, and fits pretty snugly between the back of the keyboard and the wall. Because it's just a pole on a tripod with a surface on top, it is able to squeeze in where something with a wider middle section like a mini bookshelf would mean the entire keyboard would have to be pushed out into the room even more. It's pretty stable as well. To fit it in, I didn't even extend the tripod legs fully and it's on carpet. There is some wobble, but it's sturdy enough to use a surface for a mouse. At any rate, I'm not worried about it falling over at all. Great little table. It's pretty straightforward assembly as well, although with the way the surface attaches using 4 screws with washers, it'd be a real hassle to assemble and disassemble for gigging purposes. It is lightweight though, so if you had enough room, you could just toss it in your truck or van without taking it apart. Fortunately for me though, I don't need to take it anywhere.

This product offers great value. The build quality is solid, and you really get more than what you pay for. Delivery was smooth, and the item works perfectly.