ECD Germany Air sandblaster gun sandblasting kit 8 pieces - 3-4 bar operating pressure - 850 ml tank with 4 Nozzles air recirculating sand blasting gun compressor with 4 x 0.8 kg sand set

Description

Content: 1 x Sandblasting gun with storage container, safety bag 4 interchangeable nozzles 4 x 0,8 kg Aluminum oxide powder as blasting materialTechnical specifications: Max. operating pressure: 3 - 4 bar Recommended hose diameter: 9mm Recommended grain diameter: 0,2 - 0,8mm Nozzle diameter: about 5,5 mm Container volume: 850 ml Connection thread: 1/4" nipple Air consumption: 113,27 L/min (Check if your compressor is working with this!) It is necessary to use sufficient air in operation, otherwise the suction of the blasting material will not work!) Reservoir material: aluminumEasy to use: Fill reservoir with blasting material Select matching rubber tip andattach it to the device Connect to air compressor Press the rubber nozzle firmly onto the radiating surface and actuate the metering leverDescription / Application areas: Sandblasting gun for small applications and punctual processing eg. paint removing, rust removal, cleaning, surface cleaning Ideal for hobby applications, restoration of car, boat and motorcycle parts. Including 4 different jet caps with different shapes (jet cap for surfaces, for interior corners, for corner caps, spot jet cap) By the possibility of reuse, you have only low consumption of the blasting material For the recovery of the blasting material, the appropriate rubber of the blasting gun is placed directly on the irradiating surface. The blasting agent then bounces onto the sheet and falls back into the bag from which it is then sucked again. This gun is well suited for the point-accurate radiation Suitable blasting material: quartz sand, glass beads, plastic granules, precious corundum, standard alkorundum, glass granules 4 bottles of alumina are included as blasting material