APPS2Car Magnetic Phone Mount for Car, Dashboard & Windshield Suction Cup Holder with Telescopic Arm, Requires Metal Plate (Included), Universal Fit for iPhone & Android Smartphones

This is a great product. I've used almost 100 different magnetic mounts and this one is one of the best due to it's magnetic strength and versatility. The magnetic strength is one of the strongest I've dealt with, definitely no worries about using a full sized tablet with this (tried with a Samsung Galaxy Tab S3 with no slippage even on bumpy roads). But this probably contributes to the minor flaw that I'll describe a little later. The build quality is great. Everything is mostly solid. The suction cup had 2 methods of adhesion that works together. First, there's an actual adhesive, which alone would be enough to keep on my dashboard without moving. Then there's the standard lever suction, which adds more security, especially if mounted to windows. The elbow adjustment locks with a turn knob which keeps it mostly solid. The main issue I have is the arm that extends. They market the fact the main arm can be adjusted with one hand due to the fact it uses a spring and bearing detend so you can just extend and retract the arm by a simple push or pull. While this is true, it leads to a problem I've come across. Like I mentioned earlier, the magnets are strong. If you adjust the arm to a length that is NOT at full extension, you'll more than likely end up pulling it to full extension when removing the phone from the mount. The magnets are so strong that they overpower the strength of the arm detents. My perfect adjustment is with the arm fully retracted (shortest length) and when trying to pull my phone straight off, it pulls the arm to full extention. I've found 2 ways to remedy this without permanently altering the product. First, place the metal plate between your phone case and phone. This increased distance decreses the amount of magnetic force being applied, allowed the device to be removed with less energy. On my phone, the metal plate is on the outside of the case, so this option does not work for me. Second, pay attention to how you pull the device off the mount. Depending on which metal plate you use (it comes with 3 different size/shapes) lifting it off the mount from one side decreses the energy required to remove the device. Using both the rectangle plates on the outside of my case, I was able to remove my device without accidently extending the mount arm by lifting the device off the mount from one side. When in portrait orientation, if I life my phone off from either the left or right side only, it comes off without extending the arm. Overall, one of the best mounts I've used.

Was great before- even better now! I bought one of these 4 years ago, and the other day the adhesive in the suction cup finally failed from UV radiation exposure and it fell off. After 4 years of daily use - with never a single complaint, this thing doesnt bounce around or sag or anything, its the ideal phone mount - I figured id just order another. Apparently they've started shipping these with a transparent UV radiation blocking film now! Its a flexible static cling material you install on your windshield first then suction cup the mount onto, theoretically eliminating the one flaw that this - and tbh every other - windshield suction cup mount suffers from, that being degradation of the adhesive from sunlight. Very cool!

I have been using this mount for many years now. It has worked great for every phone i have had. I have been using it for my galaxy S22Ultra which is a very heavy phone and it is flawless. Just have to buy a metal shim insert and place it inside the case between your case and the phone. I moved it between vehicles once and decided not to do that again. As reported in reviews in hot areas like in south MS,FL,TX.. etc the suction cup turns to a kind of gel if you pull it away from the windshield you have to pull slow and angle it give the gel time to release if you pull too hard it could tear and leave a mess on the windshield. It left no residue on the windshield and all came off. Remiunting it once the suction cup cooled wasn't a problem either. I could still move it back and forth bit have decided to just leave it and buy a another for my other car. It has stayed stuck on the entire time 5 years in think with no issues what so ever!! Other than this i have never found a mount that lasts and stays stuck. Inlove the magnetic operation so easy to just plop the phone on and take it off as needed.

I previously used a phone mount with a long, bendable arm, but it looked a bit tacky. It lasted a few years before the suction cup finally failed, so I decided to upgrade to this one for a cleaner, more minimal look. I chose to mount it on my dashboard. The package includes a flat, black mounting plate that you stick to the dash first, creating a smooth surface for the suction cup to grip. There's also a UV protective film included if you prefer to mount it on the windshield. The suction cup holds very securely to the provided plate. For the magnetic attachment, I stuck the metal plate to the back of my phone case. In my experience, these metal plates often fail and come off over time, so I always take extra steps to ensure a strong bond. I lightly sand the surface of my phone case, then use super glue with a plastic primer. This method has never failed me. Once applied, the metal plate stays put, preventing my phone from detaching and falling which happened frequently before I figured out to use plastic super glue primer then super glue. Personally, I avoid mounting anything on my windshield because it can lead to cracks over time. The dash mount option is much safer and works perfectly for me. Overall, this mount is a great choice if you’re looking for something sturdy, simple, and clean-looking. ** ONE complaint I do have is the extension arm is not really too good hence why I am giving 4 stars. I may run a tiny screw in it to keep it extended because it easily clicks back to not extended when i set my phone on it but I want the arm to stay fully extended every time. I found myself consistently pulling the arm back out to my phone is easier to reach on the dash.

I've had a few of these and this one seems to be holding well. I wasn't keen on the "Bling" - I didn't see that in the description - it was there but I didn't know it meant "BLING" with diamonds. Otherwise it's great. (I just say my girlfriend got it - to preserve my manliness) haha.

magneet is sterk genoeg en degelijk constructie

​Quería un soporte para el coche que fuera cómodo y no me estorbara, y este me ha sorprendido para bien. Lo que más me gusta es lo versátil que es. El imán tiene una fuerza increíble, sujeta el móvil sin problema y el brazo articulado te permite colocarlo en cualquier cristal o luna del coche para encontrar el ángulo perfecto. ​Un consejo que les doy por experiencia: cuando peguen la placa de metal, háganlo en la parte interior de la funda del móvil. Yo, por la prisa, la pegué directamente al teléfono, y ahora, si quiero quitársela, sé que me costará un buen rato. Si la pones en la funda, el día que cambies de móvil o quieras quitarla, será mucho más fácil. ​En resumen, es un producto muy práctico y de calidad. 100% recomendado para cualquiera que busque una solución sencilla y eficaz para tener el móvil a la vista en el coche.

ممتاز وعملي

Leon için en son araştırmalarımda bulduğum tek ve mantıklı bi ürün torpitonun üzerine sağlam yapışıyor düşme yaşamazsınız kullanışlı

これまで様々なスマホホルダーを使ってきましたが、マグネット式になって、かなり脱着の利便性が向上、もうホールド式には戻れなくなりました。 しかしマグネット式も変遷があり、当初はマグネットの磁力が弱くて車載時の振動で脱落落下するなど、まだまだの感がありました。特にスマホカバー内にメタルパネルがあると磁力が弱まって最悪でした。 こちらの角丸四角タイプですが、他メーカーからも出ていて、磁力の強さは実証済み。しかしどの角丸四角タイプもアームが短く、大きなスマホだと下部がダッシュと接触してうまく設置できない場合ばかりでした。 車用マグネット式スマホホルダー こちらはアーム式で希望通り。しかも全体の造りがしっかりとしていて好感が持てます。使いやすさ、設置のしやすさもこれまでのホールド式と同じでとても良かったです。とにかくこの角丸四角タイプは磁力が強くて走行していても外れることがなく、安心して使えます。 しばらくぶりにこの商品を確認したら、とんでもない価格になっていてびっくり。同モデルでもっと安い商品ごあるので、再購入するならそちらになりそう…。