Frameless Pivot Wall Mirror

Delivery quickly and very well packaged. You can immediately tell the quality. We took our time measuring on exactly where we wanted the mirror placed. It’s beautiful and happy with our purchase.

Beautiful in our bathroom. One of the hardware pieces was messed up for hanging but a trip to home depot fixed that

Beautiful mirror! Very elegant! The only downside is the way the mirror connects to the wall mounts. It's a rounded clip rather than a squared off clip so it's easy to slip off the wall mount until it's tightened down. It would be so much easier if the mounts were squared off and you could just hang it on the mounts and then tighten it down. Got to be careful you don't drop it while clipping it in. This comment is for the manufacturer. Also, one of the hex screws to tighten the mirror down was stripped so couldn't completely tighten it so it doesn't wobble back and forth. solved that with some styrofoam (from the box) between wall and top and bottom of mirror. (see photo) All that said, the mirror is fantastic!

Overall the mirror is good quality, however the brackets holding it up could be a bit better quality. The set screws that tighten the pivot of the mirror are a bit cheap and do not tighten completely. This is fine for my application as we have it tilted so it is ok not being totally snug in another position. Also, the installation directions are very vague,I have experience in installing these types of things so I could figure it out but someone with little experience or knowledge would find it difficult to install this mirror especially as the brackets are independent and have to be completely level and an exact distance apart. Again, the mirror is good quality for the costs but the hardware and instructions could be better.

This mirror is well made and heavy duty. We found it very easy to install with 2 people and a laser level. We placed the mounts on the mirror, held it up on the wall level to the laser, marked the corners of the mounts, removed it from the wall, put and "X" from corner mark to corner mark, centered the wall mount and drilled them in. Done! We had blocked the wall before the sheet rock went up in anticipation of installing this type of mirror, so we just used wood screws. There is a set screw so you can adjust the tension on the tilt. There is also a built in metal receiver for the mount attached to the mirror itself. This design would make it nearly impossible for the mirror to slip from the mount. This is a very nice mirror. You can't go wrong with it.

We love this mirror. We installed it and our bath and it worked out perfectly!!

I was very excited when I opened the box with the mirror the brackets matched the shelving and lighting I had recently installed in my bathroom perfectly! Excitement soon waned into dissapointment after spending 2 hours and 2 people trying to align and mount the mirror. Difficult to install even with 2 people, pivoting brackets are to heavy and pull away from wall especially if you pivot the mirror this caused the mirror hit the shelf below it and chipped the corner, the pivoting brackets also don't stay aligned so they get crooked on the wall, mirror keeps slipping through brackets I'm afraid to tighten them any more for fear of breaking the whole mirror. My advice is if your going to purchase a pivoting mirror purchase it as one piece, I have another pivoting mirror from PB in my other bathroom that came as one piece it will cost a bit more but less frustration in the long run. KH

These are beautiful mirrors! To install the bracket requires an allen wrench though, which is a pain to do when you can only make 1/2 turns, because its against the wall. Don't like that part at all. I ordered the silver brackets and spray painted them gold, since the gold was priced like $20 higher. Looks great.

Great for an updated look! Gives your bathroom a hotel spa vibe!

I love it

Great value.

Came as expected well packaged easy to mount

Mirror and brass fixtures are beautiful and good quality. A little disappointment with the lack of instructions. My husband and I took about 2 hours guesstimating and measuring how to hang the mirror properly and safely. Would recommend that the manufacturer provide more detailed directions for future buyers. We feel we were lucky to have success with ours considering our minimal expertise with such things.