TRUE MODS 4-inch 60W LED Fog Lights Replacement For 2007-2018 Jeep Wrangler JK Unlimited JKU Sport S Rubicon Sahara Front Bumper Off-Road Fog Lamp Round Driving Light Bulb Accessories

I installed these TRUE MODS 4-inch 60W LED Fog Lights on my aftermarket bumper for a 2007–2018 Jeep Wrangler JK/JKU, and they worked perfectly. I was pleasantly surprised at how simple the installation was—everything lined up well, and the lights even came with the correct plug, so no wiring modifications or adapters were needed. It was essentially a plug-and-play install. Once installed, the brightness was immediately noticeable. These lights throw a strong, clean beam that really improves visibility during night driving and in poor weather. The color temperature and clarity are a huge improvement over the stock fog lights. The build quality also feels solid and durable, and they fit nicely into the bumper without any gaps or adjustments. They have a clean, factory-like look but provide much better performance. Overall, these are an excellent upgrade for any Jeep owner looking for bright, easy-to-install fog lights that work seamlessly with aftermarket bumpers. Highly recommended.

I bought these as a replacement for my stock fog lights on my 2013 Jeep Wrangler. They fit perfectly and came with the necessary wiring harness I needed! Basically was plug and play! Super bright and match my led headlights! I love the quality and they were worth the price!

I recently switched my 2006 Chrysler PT Cruiser which did NOT come with fog lights from the factory, to having fog lights. I didn't want to have additional programming done nor did I want to install a new light switch lever so I did the harder and slower way of wiring in my own relay and wires and switch to the dash. Once this was done, I hooked up some OEM's to ensure it worked and it does. Now, the fog lights. I always knew I'd be switching to halo fogs and I spent a long time looking and comparing various products. The nice thing about Mopar is a lot of parts are cross compatable, these fogs work even though they're for Jeeps. Wiring them in was easy, though as other reviewers have mentioned - the connector is reversed, so the latch is on the wrong side. This is fine, I added some additional electrical tape to secure it. Adding the DRL and switch back turn signal was easy, plenty of color coded wires included. I had a lot of spare wire. I used high temperature conduit I bought from Autozone to route my wires and protect them from engine heat and weather, and ran them behind the wheel arches. I DEFINITELY RECOMMEND ORDERING WIRE T-TAPS. I color coded my wire t-taps, and tapped into my DRL and turn signal wire without needing to splice anything. I already have LED headlights, DRL's and switchback blinkers so these are a fine edition. I did not experience any hyper flashing or anything like that. They look awesome, and are very bright. Much brighter than OEM. Now, here's the con. The turn signal flash, is out of sync with all of my other turn signals. These flash about half a second sooner than every other light on the car. Whilst not a dealbreaker, it's quite annoying. I may do a video and add this to my review at a later date. I also was not aware that there is a slight red tone of light to the fogs when just the DRL is running, I have no problem with it, I kinda like it. Would have been nice to know though (unless I missed it when I was looking at the listing). My overall rating is still 5 stars. The product is high quality, plenty of wires and connectors in the box, and drop in for OEM as well as it's easier to adjust the position on these than the OEM. And they look awesome. If you're thinking about buying them, then you should just buy them. The switchback feature is optional - you can just skip connecting the orange wire.

The quality of these fog lights are amazing and look great on the JKU. Nice upgrade from the factory fog lamps. Pretty easy install. I have a Hyline Offroad bumper so the fog light housing did not quite line up. Used the housing from the old lamps and put the new lamps into that housing and fit perfect. Overall, took about 30 minutes to install by myself and did not have to remove the front grill or bumper to get them in. They are very bright and look great with the other LED lights on the grill. Excellent value for the money and highly recommend. Should I notice any flickering, will update this review.

These lights installed easily and came with the proper harnesses for my 2011 JK. They’re nice and bright and work well. I purchased my Jeep with an aftermarket Smittybilt bumper already installed. There was a space for fog lights in the bumper, and these fit the hole, but the mounting brackets didn’t match up. I made it work, but it took a fair amount of horsing around to get things lined up. If you’re prepared to get creative in an aftermarket situation, then look no further!

Great fog lights! They an absolute PITA to access and replace on the sport bumpers but that’s Jeep’s fault. The instructions were slightly lacking and I had to remove far more than they called for for full access to the factory fogs to remove and replace (had to remove the plastic wind deflector underneath, the grille cover, and the plastic piece that runs across the bumper under the grille cover). The wiring from the fog itself could be a little longer but the extensions for the turn and drl connections are plenty long. I’d suggest adjusting the beam and wiring the drl and turn signals all during the initial install because accessing the light to do it later will not be fun (ask me how I know). This is a great upgrade over the factory fogs and the halos and turn signal function are great for the price! Durability is tbd because I’ve only had these installed for 2 weeks. I’ll update if there are any issues in the future.

These helped supplement my setup very well. My amazon headlights did not light up the first 20 feet in front of the jeep. These fill in the gap. I wired them with a relay to come on with the key in run so they are acting as daytime running lights as well. Very happy.

Return items