Rear Blower Resistor for your Vehicle

Perfect fit. Easy install. Fixed my surging AC blower. Now my AC blows consistent cold air. 2006 GMC Sierra 2500HD

The HVAC Blower Motor Resistor worked exactly as needed. I installed it in my 2012 Ford Fiesta, and the fit was perfect. Installation was quick and straightforward, with no modifications required. Once installed, it immediately fixed the air flow issue with the blower fan, and everything has been working properly since. Simple part, correct fit, and it solved the problem. For the price, this was an easy and effective fix.

Worked great direct replacement before you buy make sure you have to old part with you when you order.

I've had 2 of these... neither lasted more than 4 months. If you enjoy replacing them, then by all means, purchase this item - it does fit a 2015 Impala Limited without any additional wiring needed. Just know that you will have to replace it... after the return window closes... it will also wait until it's super hot out and you NEED ac, or sub zero and NEED heat... or at least it did in my case... Enjoy!

This is my second one in just under 3 years (35 months to be exact). Now supposedly there is a limited lifetime warranty but I did not test that because I needed a new one quick and for $20 bucks I figured to heck with it, let's get it going. The only ding I'll give it is on longevity but everything else works exactly as anticipated. It fits perfect and matches the OEM version in terms of function. Doesn't seem to cause any more noise or anything. Here are a few things I learned with this: 1. Unlike the Honda original, this original replacement failed closed, which is interesting because that means the rear blower motor just kept blowing no matter what the switch was doing. The original honda one failed open meaning nothing came out of the back regardless of configuration of switches. I kind of like the fail closed more because at least there was air of out back, however, there was no way to shut it off, at all.... Even shutting off the front did nothing. 2. These are cheap parts and mine only lasted 35 months. You might be able to test the warranty, hard to say. Don't expect one as good as the original Honda part which is much more expensive. I figured I could replace this one 4 times at least before I got up to the cost of the Honda original so to me it was worth it. YMMV. 3. Getting this in and out is super easy. Just make sure to retract the driver's seat all the way, and remember it is hooked up front so undo the tabs that hold it onto the center console, then pull back slightly. Don't force the front off or you'll break it. My final tip is if any of the tabs are loose you can re-bend the metal OR if you break one you can actually use tape and build up a small tab again that won't rattle and will fit tight. Good luck!

⭐️⭐️⭐️⭐️⭐️ Perfect Fit and Easy Fix! This HVAC blower motor resistor was exactly what I needed! It was a perfect fit for my truck, took just a few minutes to install, and instantly fixed my AC issue. The fan speeds are working perfectly again. Great quality part at a great price, highly recommend if you’re dealing with similar problems!

Worked and perfect match to old part

Good US Made product (GWA Auto Parts) that fixed the issue I had with no air blowing from my 2005 Chevy Silverado 1500 4x4. All 5 blower settings would not work. Only got cool air when driving at highway speed. A friend mentioned it may be a resistor issue. This product is a Kit so you get the resistor and the harness pigtail. You simply install the resistor but need to clip some wires and attach the pigtail with some butt connectors. After watching a youtube video it seemed a pretty simple job. Took me about 20-30 minutes in all. I'm not a professional but can fix quite a few things when given good directions. The youtube video mentioned to be sure you look at the existing part and what is required for the mounting holes. Part # 973-405 is what I needed and had 4 mounting holes (even though only one hole on each side was needed to mount properly). Part # 973-409 has just 2 holes (one on each side) but the part is configured a little differently on how it fits the vehicle. Do your research to ensure you have the right one. Some reviews complain about it not fitting and that's a user error not a problem with the company providing the product. I tried to buy this same part from Napa Auto Parts locally and saved almost $20 getting through GWA Auto instead. I like Napa products but I also purchased a Blower Motor for a Prius from GWA Auto that also works well and again was easy to install thanks to youtube. Nice to get quality products from a US company and not some knockoff from China. I will keep buying through GWA Auto when possible. Thanks!

all good so far

works well

El articulo esta mejor de lo esperado, lo consideraria nuevo y exelente, envio en tiempo y forma

I worked perfectly fine.

Nuevo de paquete con precio muy accesible y excelente tiempo de entrega. Recomendado totalmente 👍