GuliKit Joysticks for PS5 DualSense/DualSense Edge Controller,TMR Magnetic Sticks,720° Adjustable Tension, 2 Pcs Anti-drift Repair Modules with 3 Pairs Thumbstick Caps, Soldering Required

Best joy sticks for the ps5 controller. Adjustable tension is a god send and the variable length sticks included are great if you have bigger hands or want some more fine tuning.

1/2 defective sticks, when pressing down it depresses 2-3 times for one press down actuation and it makes multiple clicks for one press sounding/feeling horrible and crunchy. These are pretty expensive for what they are so I would expect some sort of quality assurance. If someone would contact me about sending 1 replacement module. To be clear and not trying to scam, I only want one module to replace the defective one I had in my pack. I would appreciate it enough to remove this review. Thanks 🙏🏻

🎮Truly a game changer! Especially how I have learnt how change the controller sticks myself and calibrated them. these were perfect addition to my ps5 dual sense edge controller for less thumb sticks tension and adjustable hight, now they are light🪶 and provide less fatigue to thumbs for long gaming sessions🎬. The Gulikit gets a guli thumbs up from me!!👍

I've not yet gotten around to fitting these sticks, but they're not the first set of replacements I've used (though they are for the Switch Pro pad). By comparison they are the most expensive set I've had at £19. Being hall-effect in nature, I'd expect them to last as long as the consumable 'stick heads' do, and fortunately you get three pairs in the kit; though they are different heights rather than 'replacements'. They certainly have an air of quality when handled. The supplied interchangeable stick heads appear to be a plastic body with a floating steel tube and moulded-over rubber (the latter of which has been done well with no visible seams on the outer/visible surfaces). I'm not certain if the plastic clips that hold the sticks into the body will survive a large number of changes; they're clearly meant to be fitted once and left, rather than changed on a daily basis (e.g. for different games or users). The novel tension adjustment system allows for quite a large range; from virtually no resistance to very stiff/springy. This is adjusted with small screws inside the neck of each assembly, and requires removal of the stick heads. It is unclear how well the screws will retain their position over time. The switch action (when depressing the stick) feels tactile, as you'd expect. I can't comment on fit or performance; but the sensors in these are commodity items now and should remain accurate for a very long time with zero drift. The tactile switch and stick heads are the things that will fail; but probably not before the rest of the gamepad does. Pricing is competitive with the other options on Amazon; specially when you account for the adjustability and spare stick heads.

Faulty - after fitting it there's a massive error rate on one of the sticks. Even after calibration with the guilkit tool or playstation tool. That one stick also suffers for massive jitter with you move up to 0 it flicks back as well as 270 degress it has a dead spot

This review is for "GuliKit 720° Adjustable Tension TMR Magnetic Joystick Replacement Kit for Switch Pro Controller​ Anti-Drift Stick Repair Module with 3 Pairs of Thumbstick Caps, Soldering Required", priced at £19.99 at the time of ordering. This is a little more expensive than non-adjustable hall joysticks, but not significantly so and definitely worth considering if you dislike the low friction of standard hall effect joysticks. The sticks themselves work perfectly. I did have to recalibrate on the console after installation, but since then they've got full range of motion and, as expected for Hall/TMR joysticks, no drifting issues. The inclusion of multiple pairs of differently sized caps in addition to the tension adjustment means that not only do you get the full motion capabilities, you also get an impressive amount of customizability. Installation is as easy as it can be given that Nintendo's design requires disassembly and soldering to replace the joysticks. I did have a bit of an issue with replacing the thumbstick caps, as they clipped quite tightly into place and required a bit of wiggling to move around. This isn't much of an issue in use as I'm likely going to stick to a single combo most of the time (one short, one medium length), but it does make adjusting tension using the screw hidden under the thumbcaps a bit of a pain.

Bought this to fix the dreaded stick drift on my Switch Pro controller. The kit itself is well made and the adjustable tension is a nice touch – you can really fine-tune the feel. That said, this is NOT a beginner job. Soldering is required and you’ll need a steady hand and the right tools. Took me a while, but once installed, it works brilliantly – no drift at all. Would recommend if you’re confident with electronics. If not, might be worth getting someone experienced to fit it.

1/2 doesn’t work

Ottimi analogici, sfiorano la perfezione

Wunderbar, alles super!!!

sehr gute Auflösung

Matériel facile à monter. La précision de ces joysticks est chirurgicale, dommage qu’au bout de 4 mois d’utilisation l’un des deux joysticks ait rendu l’âme.