DEWALT Miter Saw Stand With Wheels, 32-1/2 in. x 60 in Foldable Rollling Stand, Adjustable Height, Durable Steel, 8 ft. Material Support, Universal Mounting Rails (DWX726)

I rarely leave reviews, but for the DeWalt Miter Saw Stand (I have the rolling heavy-duty model), I absolutely have to. Simply put, this is the Cadillac of jobsite equipment. If you are doing any kind of serious trim work, framing, or deck building, this stand is not an optional accessory—it's essential for your health and efficiency. The Back-Saving Difference My biggest motivator for buying this was honestly to save my back. Wrestling a heavy 12-inch sliding miter saw (even with two people sometimes) onto sawhorses or a fixed table is a recipe for a bad day. The genius of the DeWalt system is the pneumatic assist lift. When it’s time to set up, you simply flip the lock, grab the handles, and the saw raises itself into working position with incredible ease. When you’re done, the dampened lowering mechanism means you don't fight gravity; it glides the whole setup back down for easy rolling and storage. It truly eliminates the strain of hoisting and lowering. This feature alone makes it one of my single favorite pieces of equipment I own. Built Like a Tank, Smooth Like a Caddy Beyond the lift mechanism, the build quality is exactly what you'd expect from DeWalt. It's solid, the locking mechanism for the saw brackets is foolproof, and the support arms glide out and lock firmly without any slop. The large wheels handle rough terrain (gravel, lumber scraps, uneven concrete) on a jobsite with no problem. When folded up, it takes up a surprisingly small footprint, yet when deployed, it offers exceptional stability, even when cutting long, heavy stock. If you are on the fence due to the price, stop thinking and buy it. The cost is negligible compared to the lost productivity and pain of a thrown-out back. This stand will pay for itself in hours saved and physical discomfort avoided. Five out of five stars—a must-have tool.

I won't go cover the same ground as other reviewers suffice to say that its a good piece of kit and deserves every star that I've given it. What I would like to cover in my review is the things that other reviewers haven't covered: - its BIG! I stand 6' tall and this reaches my chin when its stood upright. - Its heavy (read well constructed). Which explains why it cost an arm and a foot in shipping costs - the basic unit comes in one piece with assembly required for the lower legs, riser handle and material support rollers - looking at it, it looks a bit flimsy around the wheels. Don't believe your eyes! It's constructed in such a way that there isn't a flimsy piece in it - when closed down, there is a locking bolt that prevents the mechanism from opening while vertical - the material supports use an unusual split tube mechanism to control vertical movement. Not sure how I feel about this - although a universal mounting, the hole spacing on my saw meant that I couldn't mount it dead centre in the tray. - there is a clearly defined front and back. The front has the logo (of course) and the back has a cord minder - when sliding the the material support roller arms on, there is a detent which prevents over extension or removal - comes with a handy onboard hex key. I was unable to find the spanner mentioned in the assembly instructions Just a few things I'd like to mention/expand on: My inability to mount my saw dead centre on the tray is a minor thing. I intend at some point to make an adapter plate which should resolve this. I don't have a De Walt saw but I'm sure if I did, that it would fit perfectly. Further, this trolley/workstation is of such a size that it should cater to even the largest compound mitre saw. one of the material support rollers isn't parallel to the floor. Not sure what to make of this yet but I don't consider it majorly alarming. I chose the De Walt over the Porter Cable version partly because it was minorly cheaper but mainly because the Porter Cable had a number of reviewers complaining about the lifting mechanism locking up. Strange as the PC version appears to be exactly the same design as the De Walt. Before purchasing this, I had considered building my own out of wood. Ultimately I decided not to due to uncertainty about stability. The price of the De Walt was competitive but I really got killed on shipping costs. I'm presently getting together items for constructing my own own router table so will probably revisit the idea for for that project. Given that the router installation will be much lighter and not be under such heavy weight stress, the idea is probably much more practical. Finally, some background info. The concept of a rolling stand is pitched at job site portability. In my case (being a hobby woodworker based in my garage), I felt that my compound mitre saw was a tool that I would use infrequently hence I wanted a scenario where I could readily access it but pack it out of the way when I didn't need it. Now that I've had a bit of experience with this form of portable workstation, I'm keen on doing the the same for my router table (as mentioned) and also (at some point in the future) my table saw upgrade. As an amateur woodworker, I operate out of my garage and that is a space that is rapidly decreasing in size. The idea of easily moved, easily setup workstations has a great deal of appeal. Addendum: All my previous comments stand however my perception of this unit has changed slightly in light of recent discoveries. Let me explain: As mentioned I am planning to upgrade my table saw at some point in the future. I've had my eye on a De Walt DWE7491 for some time but have recently discovered the Metabo version (sorry don't know the model number). The De Walt has a matching stand much like the Rolling Mitre Saw Stand (sold as a separate unit) whereas the Metabo has wheels and four built in legs which unfold from the unit itself. I'm becoming very taken with the Metabo... its compact, centre of gravity is low (basically on the floor) but its still portable. In light of this, I'm beginning to see the Rolling Mitre Saw Stand as using a sledge hammer to crack a nut. As far as I'm aware, no-one makes anything similar to the Metabo concept for Mitre saws so buying one is out of the question. However as an amateur woodworker, making one is quite achievable. Having said all of that, this takes away nothing from this unit. In my opinion, it remains an excellent choice for job site portability and certainly the best one that is commercially available.

This stand is probably the single best mitre stand out there. Collapsible and portable, I am now able to take my mitre saw to any job site without having to lug the saw by itself and then find a place to put it. I am able to work at ground level, full height, and even a bit lower than full height. It is solidly constructed and the release mechanism is also quite solid. My only complaint is with the length of the release cable, it took me a bit of testing to get the release to activate but was easily overcome, just needed to move the release lever a bit further (it got tight so I presumed that was the stopping point). It moves up and down quite well with it being pneumatically operated. Highly recommended.

Awesome saw stand! Super easy to assemble and fits two of the mitre saws I have. One being a makita and one being a dewalt. Very compact and easy to store away and maneuver around.

Yes, this is a sturdy, heavy saw stand which ought to fit a wide variety of saws. It works fine for my 30 year-old Hitachi slide saw. I think that others have described this saw stand fairly well, but there are still a bunch of issues that I've come across not mentioned in other reviews, particularly in terms of configuration. First off, the product description completely fails to describe the actual dimensions of the stand with the supports fully extended. The answer is 8' on the nose, so you can indeed trim the end of 8' material and still be balanced, depending on how you locate the saw on the stand. It's important to understand that the stand is asymmetric front-to-back (as seen when you face it to make a cut). This means that it matters which way around you install your saw, i.e. whether you have the wheels to your left or your right. If you want to have the greatest possible amount of reach for the supports, then you'll want to have the wheels on your right. This is because the mounting channel for the supports is not set in the centre of the stand, but the bars at the end of the supports are symmetric. This is shown in my pics. Having the wheels on the right was not a problem for me because of other factors noted below, but at may be for you. It's worth thinking twice before you put everything together, since it's a hassle to unbolt the saw and turn it around. Before you put things together, you may want to think about whether you're left or right handed, whether you like the infeed or outfeed to have more support, and where you have the centre of gravity of the whole assembly. You may or may not want to mount the saw centrally left-to-right on the stand. I didn't want to for a couple of reasons: a) I wanted to have the maximum available support length on the left. This is because I like the infeed on the left, and even though I'm left-handed I operate the saw with my right hand, and want to hold the material I'm cutting mostly with my left. In my case, I was able to set up the saw pushed over to the right enough to give me about 52" of available infeed support on the left. This resulted in a matching reduction in the available maximum length of support on the right. b) I wanted to have the lowest possible centre of gravity when the stand is folded up and standing upright. This makes it easier to move around on its wheels and less likely to fall over when not resting on all fours. If you want to get maximum support out of the in/outfeed supports (to cut the widest possible stock), then you'll probably want to mount the saw as far back as possible on the stand. This is all a result of the design asymmetry mentioned above. For me, this was not a problem, and didn't result in an unacceptable weight distribution, but I imagine that for some saws this might be a problem, especially if its design is particularly back-heavy. Finally, a few criticisms: The product I received had a mis-adjusted release catch, which meant that it would not lift up at all until I fixed it. This is lousy quality control. Yes, anyone getting a stand like this ought to be able to figure out how to adjust it, but they shouldn't have to. I was surprised by how much force was required to raise the stand up. I don't think that my saw is particularly heavy, and the docs keep warning about how it might spring up on you if you're not careful, but I sure don't feel that's a problem for me. A minor note on standing the saw/stand upright. The docs tell you not to do this, but of course, we all will, and they've obviously designed it to be able to do so. Given this, it's annoying that the hoop that the stand rests on in its upright position has no anti-scuff rubber on it. It's a little thing, but you get your nice new stand in official brand-yellow paint, and the tail end is going to get all scratched up on the first day. I should also note that the stand I received was missing the length stop and its associated knob. I was able to get this supplied from DeWalt customer support, but a) Any missing component smacks of poor quality control somewhere in their manufacturing/packaging. b) The missing part took two weeks to arrive. c) It was a pain to deal with the DeWalt customer support web site. In particular, I had to file my claim with the exact missing part number, but this was not shown in the docs supplied with the saw. Finding the part number was non-trivial because I had to find the right exploded parts diagram, for exactly the right version of the stand, and it appears that they've gone through multiple versions. All told, getting the missing parts took a ridiculous amount of time - a big pain that I shouldn't have had to endure for what ought to be thought of as a high-end brand-name product.

Well designed and built saw stand that improves miter saw storability and go-anywhere port ableness. Multiple height settings. Easy installation but read instructions thoroughly beforehand as I incorrectly cut safety zip ties that should've remained on until assembly was almost complete. Also, be careful when moving the saw across an uneven surface such as a grass field as my saw almost tipped over multiple times. Overall, very pleased with this purchase.

We got my husband a larger miter saw when they went on sale and his current table wasn’t big enough for the new one. This thing did the trick and he’s happy with the quality and durability of it.

This is amazing. I bought the DeWalt mitre saw and purchased this after. It's sturdy and great value for a woodworker for thee money. So easy to set up take down and move around.