I have a 100 gallon preheat tank plumbed ahead of my regular water heater. can I install this powered by 600 watt of solar panels. will it overheat

I would not advise directly connecting this to solar panels as there are no regulars for the amount of power that enters the heating element. Solar panels are rated to a specific wattage in the best environment possible, but they will likely never achieve the written specifications on the panel/manual. Take note that in a typical 12V solar panel the output voltage typically ranges from 16V-18V, this is be cause you would need higher than 12V to charge a 12V battery and it is expected that the solar panels will not always get full sun. I believe best practice would be to get a charge controller and a small battery bank for your setup. You can get a decent charge controller for this setup for around $20-30 on Amazon. Batteries will vary, if you go with deep cycle make sure you have ventilation as they excrete flammable hydrogen gas, make sure you keep them filled with distilled water and have a cut off switch so they do not run under 40% charge. Running deep cycle batteries lose a lot of life if they are drained below 40% charge. You can also get lithium batteries that can be run all the way down to 0% without any difference in degeneration; however, with lithium batteries degeneration is occurs every time charging is initiated. With a solar panel and a charge controller you'll be constantly charging and discharging the battery. Good luck with your setup, sorry if this response inquires more questions than it provides answers.

Can u run just one part of element for low demand and kick on the second part for higher demand

Of course you can, but please take down both metal plate.

What the correct size of then ? Length and Width?

Please make sure your voltage and wattage(12V, 600W), and then take into account the length (Tube length to the terminal flange:180mm) and flange(1" NPSM).

Desertcart Logo

交付 SINGAPORE

获得最佳体验获取应用程序

下载应用程序

我们从

阿联酋
英国
印度
美国
日本
KOREA

客户服务

关于我们

客户支持

常见问题

产品是真实而真实的吗？+

是的，所有产品均直接来自美国，英国，阿联酋和印度的授权零售商。我们保持严格的质量控制过程，并在运输前验证每种产品。所有项目都有适用的制造商保证，并由我们的标准退货政策涵盖。

交货需要多长时间，这是可靠的？+

送货时间因目的地国家 /地区不等，通常从3-9个工作日不等。每个订单都可以通过我们的系统完全跟踪。我们处理所有关闭范围，并使用可靠的快递合作伙伴进行最后一英里的交付。您将通过电子邮件和我们的应用程序定期收到有关您的订单状态的更新。

什么是凡人车？从安全订购安全吗？+

自2014年以来，落伍车是一个国际电子商务平台。我们每天在全球范围内安全地处理数千个订单。每个产品都会在交付前经过我们的质量验证过程，我们提供端到端订单跟踪，24/7客户支持以及全面的回报政策，以确保安全的购物体验。

产品定价如何计算？+

我们的价格包括产品成本，国际运输，进口关税，关税和当地交货费用。我们处理所有海关和导入程序，确保交货时没有隐藏的费用。 Pro会员将获得额外的福利，包括免费送货。

S$100

关税和税费包括

SINGAPORE店铺

免费退货

30天对于 PRO 会员用户

15天无会员资格

安全交易

ChatGPT - opens in a new tab Perplexity - opens in a new tab Claude - opens in a new tab Grok - opens in a new tab Google AI - opens in a new tab

TrustPilot

TrustScore 4.5 | 7,300多个评论

拉维·S。

我很喜欢这里提供的多种产品。一定会再次光顾。

2 个月前

Pooja R.

客户服务超出了我的预期。非常适合购买在其他地方找不到的产品。

1 周前

查看所有TrustPiLot评论

Part number	DERNORD-37
Item Weight	310 g
Product Dimensions	21.34 x 4.06 x 25.4 cm; 310.43 g
Is Discontinued By Manufacturer	No
Material	Stainless Steel
Voltage	12 Volts
Wattage	600 W
Batteries Included	No
Batteries Required?	No
Item Dimensions LxWxH	21.3 x 4.1 x 25.4 cm

DERNORD 1" NPT Fitting Dual U Shape 12V 600 Watt Immersion Heater Submersible Water Heater Element Stainless Steel Heating Element

细节

描述

规格

有问题吗？看看别人问了什么

常见问题