3D Printer Enclosure for Bambu Lab A1/A1 Mini,Fireproof&Dustproof 3D Printer Cover with Constant Temperature Control,Noise Reduction and LED Light for Home/Office DIY 3D Printing,520x600x700mm-Grey

I bought the **UniTak3D 3D Printer Enclosure (B0F2FG2YS1)** for my Bambu Lab A1/A1 Mini and it fits *perfectly*. Quality is over the top good, and for the price it’s an amazing value. Assembly took less than 5 minutes and was very easy. The LED light bar is excellent, and while the clear plastic window has small wrinkles at first, after a few prints the heat softens it and the wrinkles flatten out. This enclosure surpassed my expectations. I ended up buying **five** in two days. I highly recommend it, especially for print farms. Key benefits for me: * Dust and odor protection * Blocks air drafts that cause warping * More consistent print quality * Saves filament and produces perfect results * Improvs Plate Adhesion If you want a fast, reliable enclosure setup for your printers, this is a no-brainer. --- Do you want me to also trim this into a shorter version under Amazon’s 1,000-character review box limit?

First off i do want to say that the material this enclosure is made of certainly seems tough and rigid enough, and the access holes are really nice. The AMS LED light is almost worth the price, almost. Now for my list of Cons: *The Exhaust fan hole really is 70mm, but that's where the holes are in the corners, 70mm fans have holes that are a touch closer together so it's obvious that this was asked for from the producer and the manufacturer just cut it to spec. Neither one knew fan dimensions so you end up having to make your own holes with either a 80mm fan set, or let the 70mm ride with the holes around the edges and a hole cutout that may not get fully covered. *The hole cutout for the AMS only really works for the stock AMS stand, other styles lead to needing some creativity or just longer PTFE tubes so that you can route them without the X gantry crashing into that hole. *There is another large vent hole at the top that is not detailed in the listing that you'll have to hope doesn't lead to material venting out. Having an exhaust fan is certainly needed since not having a fan will lead to harmful fumes escaping out the top back. *The enclosure is also taller than advertised so i had to redo my shelving for the space i planned for this to sit in. 10mm taller isn't a dead break but it threw off my setup. *A place where a Hydrometer could go is not really where you could see it so you would have to cut your own hole for something like that. This last one isn't really a point against the product but more of a note: The frame is a bit thick so the drawer stand that i had printed for the A1 no longer could be opened so i had to print some puck risers for the printer stand to stand on so that i could access the drawers. just a note for those that have something like that under their printer. Overall i would have purchased something else but I'm not so mad that I would go through returning this. it's good for a cheaper enclosure but the tiny things add up.

I’m happy with it it works great with Bambu a1

Pros: •It works as an enclosure and mostly keeps the printing smells inside. Cons: •It has its own strong smell right from the packaging. •The clear parts are wrinkled and hard to see through because of that. •The included LED light has garbage color rendition so everything has a nasty blue tint to it.

I bought this for a Creality Ender 3 Pro. The Amazon listing indicated which size to order, but when I assembled it, it was a lot larger than I expected. I do have room for it though, so it's no problem and gives me room to get my arms into the tent to work on the printer when needed. Speaking of assembly, it's easy to assemble once you've done it once before, but expect it to take a half hour the first time. The one-page directions are helpful and are CORRECT, so don't assume the directions contain a mistake, like I did, and then have to reassemble the whole thing again. :) The X, Y and Z dimensions of the frame are all slightly different, and if you turn the frame on its side or rotate it 90 degrees, the fabric cover will not fit. In operation it's great. There are two large velcro panels for easy access, and a huge zippered front and top. I didn't test it for fire protection but it absolutely helps to keep in heat and keep out breezes and temperature fluctuations in the room. All in all I'm very glad to have this! Just keeping dust off my printer and filament is a nice plus.

La lámpara que viene con la caja no corresponde con la descripción del producto. La lámpara debería ser de 5 Voltios con conexión de USB, pero llegó una lampara de 24 Voltios con un conector que no es comercial. Ademas si bien la caja cumple su funcion, el plástico transparente de la caja queda arrugado dificultando la visibilidad, lo cual no corresponde con el render presentado, en mi opinión es una publicidad engañosa. No devolví el producto, porque lo necesito con urgencia, pero quede insatisfecho.

Really good for the price, i have a Crealty Ender 3Pro it fits perfectly, the light is super bright. Best upgrade for printing ABS, no more craking, and can print twice as fast.

LED Light causes issues. Bambulab A1-I have been trying to contact Unitak3d with out success. I think the enclosure is good but the LED light bar connection that is supplied causes filament loading issues on Long multicolor prints. I have two enclosures and both are constantly doing 11-14 hour prints. with multiple color changes .( usually 150+) I have found that around 2/3rds through the prints they fail with filament loading issues. I have chnaged the PTFE tubes, Replaced the extruder gear , Repplaced the filament sensor and also completely replaced the Extruder with no change to the filament loading issues .After many attempts and failures I removed the LED light bar from the second AMS light connector on the rear of both A1 prionters. This immediatley resolved my issue. I have tried to contact Unitak3d with out success .

Me ha sorprendido lo resistente del material. Se monta en un momento. Comprada para Bambu A1, cabe perfectamente incluso con la bobina arriba.

S adapte parfaitement a l'imprimante bambu lab a1. il y a même un trou quand on utilise le support ams. produit de très bonne qualité.

Helt ok

Acquista per mio figlio… lui dice che è perfetta !

Very good