L Shaped Standing Desk, 63 x 47 Inch Electric Height Adjustable Corner Desk, Sit Stand Computer Workstation, Preset Controller, Home Office, Black Frame with Black Top

Great, sturdy, spacious adjustable stand-up desk. The instructions could have been clearer, but besides that, desk functions well and motor is quiet.

This has been in my office for about a week now, and it's proven to be a reliable and versatile addition to my workspace. Long story short: It's fast, solid, and a good value for what you're paying. The construction was simple. It came in two separate boxes (they're heavy so grab a friend), and the instructions covered both a right and left orientation. I had it built in less than an hour, and I was able to save my preferences for both sitting and standing within a few seconds. By contrast, my previous standing desk took half a few hours to build and required a hand crank to move up and down. The controls are extremely simple, and the motor is relatively quiet. It moves quickly (I generally go from sitting to standing within 3 seconds), so I'm rarely killing time or flow moving from sitting to standing. The quality of the materials is high. The desk feels secure, and there's very little shake to it. My floors aren't the most level (old house), and the legs include the ability to level to meet most floors requirements. They also include some small cable management tools that keep everything neat and tidy. The product was clean upon arrival, and the desktop seems to be solid and sturdy. After a week of use, I have no regrets on this one. If you're looking for a simple to use option that won't break the bank, you've found it.

Best desk I've owned. It works well on my crooked floors (desk has adjustable feet ). It holds alot of weight such as monitor clamps. This desk is a great value for the money, and is very sturdy

It’s a good sturdy product, it took me about 4 hours to put together and I’m very happy with it. My only complaint was the damaged piece, thankfully it was in the corner where no one will see it but it kinda sucks to get something damaged. Overall I’d definitely purchase again, if you have two people it would probably go faster to assemble.

This is my first standing electric desk. I got this one to replace my hand crank one. It is easy to put together. Needs more than one person to stand it up as it is extremely heavy. If you can, instead of putting it together fully upside down, I prop the top half panel against something and then add on the legs so it is already on its side for a much easier flipping up experience. The instructions are wrong about the power box placement. If you are doing the reverse version they show the box being put in backwards and you will have to undo it and redo it as the wires will not reach so make sure it looks right before committing. The desk has no issues changing heigh with the weight of a large PC and two large monitors. It is only shaky at the end of the L shape because I have a two leg version. I just keep light paperwork on that end.

I love this desk. It’s pricy but worth it to me. Ignoring my weird setup right now as I wait for my tv stand to come in. This desk clearly has tons of room. I did go for the largest option with two legs, it’s very very sturdy. I can sit on it and still raise it up and down (not that you’d need to or should have human weight on a regular desk all the time). You can switch the side the L is on, amazing function in my opinion for being able to customize your space how you need. It looks clean, however the cables underneath do annoy me. I thought it had a cable management tray and it does not. The only downside I’ve really had is how easily the top gets dirty and visibly smudged. My cats paw prints can be seen on it often but it’s easily cleaned with a Clorox wipe. I’ve had no issues with scratches on it either. This desk is very heavy. It’s best to have two people for set up. Especially when you need to flip it upright after setting up. Only took about 1 hour and 45 minutes. There are tons of extra holes on the bottom so multiple of their frames should fit the desktop. It was confusing at first but works just fine once you line it up and start going.

To explain my headline a bit. Once the pieces are all together you realize this is a sturdy and smooth desk. Very little to complain about once your done building. Now the building process....Ohhh man..This is the second desk i built from the same company for my house. Two offices so two desks. I went through this build horror twice because the price is good and the quality is nice. The problem you will realize right away when you are starting the build process is that the pilot holes do not line up with the brackets that you will use to connect the desks. I highly recommend to go in manual with a screw driver and do not take the insane advice of the instruction manual and use a drill. Using the screw driver you can push the screws into the position while you tighten. Clearly the machine at the factory is not properly making these holes. The second thing and I HIGHLY ADVISE people to be careful is the instruction manual. This desk is delivered in two boxes. One for the tables and the other for the legs. Both come with instructions on how to connect the table. Both instructions contradict each other. If you want to set up your desk in a left way configuration ignore the manual that comes with the tables and use the ones that come with the legs. I learned this the hard way with the first purchase but the second one i knew what to do and avoided that trap. Lastly be prepared to make your own pilot holes. I was at the step to connect the power supply but wouldn't you know it there were no pilot holes at all. WTF man...Its really no big deal as you can create your own if you have the tools but this is shoddy work. Honestly, once assembled its nice. Sturdy. I dont feel like it will fall apart. The problem is how its staged at the factory. Clearly, there's no QA so you will wind up with bad instructions and misplaced pilot holes. Is it worth the purchase? Yeah. It's not that expensive. My next stand-up desk will not be from this place. Must be run by child labor to be honest.

After a while researching for a new desk, I finally settled on this one and it is worth every dollars The 72inch version allows me to fit comfortably 2 laptops and 3 monitors, which is perfect for my setup. The good : - I love the fact that the L part of the desk can be placed on either the right or left side. It will allow me to reconfigure somewhat easily if I ever need to. - The Desk feels very sturdy and can hold a lot of equipment - The sit/stand mechanism works really well and is relatively quiet. The less good : - The installation was really easy and the instructions were clear, BUT, there are a lot of pilot holes missing which means I had to drill them myself. Was still able to assemble it in less than 2 hours by myself so it’s not too bad!

Didn't last long, it stopped working within a year. Does not stand up, screen shows error, seller not contactable.

Be warned: the desk needs holes to be drilled, there are some guide holes which show where to drill if aligning with the desk stand. I freaked out when I realized both my panels didn't have all holes and thought that I was handed the wrong desk table/boards. It turns out you just have to drill the missing holes. I fortunately had a drill and it worked out well. The desk is able to store heights so I store one for sitting and standing and it works as expected. There is some wobble when using a walk pad and resting your arms on the desk. Probably as much wobble as you'd expect on most desks, but it is fairly noticeable. It took a fair amount of effort to assemble this thing, the instructions are also fairly difficult to read at a glance but it makes sense once you are done with assembly.

Bought this for my office. Works well, very sturdy.

Super easy to put together, very sturdy and really happy with the purchase