Pull out Cabinet Organizer, Expandable(12"-20") Heavy Duty Slide out Drawer Fixed with Adhesive Nano Film for Pots, Roll out Shelf Storage for Kitchen Base Cabinet Organization, Pantry, Bathroom

I have been looking for a simple to install, inexpensive and durable pull out drawer storage for our kitchen for quite awhile and ordered 4 of these when I saw them. Two out of 4 took 5 minutes each to install and the adhesive set well and APPEARS to be able to hold an esemble of kitchen items quite well. Time will tell as far as duration of adhesion. Another drawer had adhesion issues most likely due to a combination of some residual dust as well as some mildly worn areas on the particle board substrate that I was mounting them on. Even replacing the adhesive strips did not allow for more than two fry pans to be added before back of drawer runner would lift up. Had to add small screws to back of rails to keep drawer in place. The fourth drawer had one of the rails fall off when removed from box that could not be repaired; will be returning for refund. I would highly recommend this product due to ease of mounting and affordability but be aware that the adhesive strips may not adhere well to bare particle board even if completely dust and dirt free. There was minimal installation instructions in the package and it would have been nice to have had some FYI about potential adhesion issues with particle board type shelves and recommendations on how to insure adhesion including use of screws as required.

This pull out organizer was incredibly easy to install! It works wonderfully in my space and is heavy duty. I intend to order three more!

A lot of customers who bought this organizer complained about the adjustable bottoms not staying in place when installing. First I placed it in the cabinet and adjusted the bottoms just right. Then I drilled a hole in the front and the back and secured the adjustable bottoms with sheet metal screws. Now the bottoms won't slip when installing the organizer into the cabinet. Also recommend using wood screws to secure the rails to the cabinet - not the sticky strips. This will allow you to later remove the organizer when moving.

I purchased 2 of these to see if I like them. They are heavier than I expected but should not have been surprised since they are metal. After applying the adhesive strip to the bottom rails, you peel the backing off and set them in place. The adhesive is almst as powerful as super glue. I dropped the first one I install and it was crooked. Took a couple of minutes to remove since it is not intended to be movable. By tipping the tray up slightly and making sure it was touching the back of the cabinet, I was able to set it in place. It is good that they sent 2 pairs of strips, in case you make a mistake. The adhesvie strips are not quite as long as the rail so put them on starting at the front of the rail. If, over time, I find they don't stick well I can put a screw in the back. One is installed full width and the other is adjusted. I followed someone elses suggestion and taped the drawer once I had it adjusted so that I could set it in place without it moving. I would like these even better if the sliding ral was built up slightly so that you could use with a lip. I saw a couple like that but they were not deep enough for my cabinets.

Belle profondeur et largeur facilement ajustable. J ai vissé sur la melamine mais les bandes collantes semblent avoir une bonne adhésion. J ai installé sur une tablette amovible et pour éviter que celle ci bouge j ai utilisé un équerre afin de la fixer au panneau du coré de l armoire. Facile à installer et pratique dans les tablettes exergues du bas d armoire.