Elite Screens 6" White Projector Screen L-Brackets, Single Metal Welded Construction, Wall or Ceiling Mount - Includes Hooks and Hardware, Model: ZVMAXLB6-W

This has been great for our projector screen. I wanted something to hold up our home projection screen that was sturdy and not going to be a nightmare to hang. This fits the bill. Very sturdy and looks nice. It's easy to get the screen on and off, which is another plus since the first screen broke within the first couple days and had to be returned. There's not a lot to say about this, but I'm very happy we went with these brackets

I ordered these so that I could hang a projector screen in front of my Plasma tv for the occasional big screen viewing. I use this for an 82 inch screen. The bracket does extend for 6 inches, and is very sturdy. However, the section that screws to the wall is almost 6 inches as well - so in my case, it extends longer than my crown molding at my ceiling. I am only using 1 screw (not three) for each bracket - it works fine. Overall it is a high quality product that I would recommend it you have to extend your screen away from a wall.

These brackets completely made my first ever DIY projector and screen set up experience so easy and enjoyable. I am writing this review almost one year since my purchase, because I wanted to see how the brackets held up over time. I can confidently say that they were well worth their price. Like many, I needed brackets that were customizable and allowed for easier mounting of my projector screen, where I could adjust it further forward, further back, up higher or down lower. I also needed these brackets because I was mounting a screen to drywall and felt that I needed something secure since I would be pulling down a screen constantly. These were easy to install and I loved being able to adjust the screen slightly to make it level and fit perfectly with the projector. After almost a year of daily use, the brackets hold up well to pressure of retracting. These brackets made my installation much easier than it originally was. I was (well still am I guess...) a novice to these types of things, but the set up turned out great. If you purchased a retractable projector screen, make sure these are part of your purchase.

I used these to mount a Homegear 120" screen. These things are perfect. Just what you need to mount a projector screen. Very sturdy, made of metal. You can mount on the tips, or within the slot in the middle to set the position closer to the wall. Mounting in the slot allows you to adjust height on each side so you can be sure it's level. Worth the price to simplify the installation.

Solid brackets. Mounting can be a little tricky if you're not careful, as the eyelets will have a tendency to push the bracket out when tightened, or become misaligned in the process. Good to have some patience when installing. They came out really well for me, and support my motorized projector screen very well without moving around like I thought they would.

These worked out well. The mounts have holes for three screws which let me relax amidst visions of my hundred foot screen ripping the wall out. I bought carabiners as well as various bolts with washers and hooks from Hardware store to attach it to the screen. Just so I had options. I think it might have come with screws. I used regular screws on the studs rather then drywall screws in the perfect aesthetic place. Again didn't want to worry about my 28lb screen pulling the drywall open like a monster. However, this is pure paranoia as the drywall screws individually could probably sustain the weight. I go over the top with these projects, hence a hundred foot screen in an apartment.

The screws and attachment for my Elite Screen manual pull down is pretty weak compared to this attachment bracket. It made the installation SUPER easy - it took me a total of 15 minutes to install my screen. I drilled into studs for my installation so I did not use the drywall anchors that came with the product. The screen that these brackets are holding up is an Elite Screen 84" manual pull down. A few things to keep in mind with these L-brackets: 1. Recommend using toggle bolts for drywalls instead of using the included dry wall anchors. They're the basic plastic anchors. 2. It comes with 3 screws to attach for each bracket. The top screw is hard to get to with a power screwdriver. You're going to need a long neck phillips or attachment to your screwdriver. I ended up using a phillips with a 9" neck to screw in the top screw. 3. You can adjust the attachment to the L-brackets to dictate the distance from the wall that you want your screen to protrude. I'd give it 4.5 stars due to the top screw being in such an awkward place to screw in. I hope this helps.

The L-Brackets themselves are sturdy and well made, but the hardware that comes with this is cheap and undersized, including mounting screws, eye bolt, and carabiner. I had to go to a hardware store to buy better quality bolts and screws. I bought this instead of cheaper alternatives because it was name brand (Elite Screens) and I expected high quality, but I was disappointed. The mounting screws are very small and only long enough for drywall mounting, they aren't long enough to securely reach a wall stud. The eye bolt is quite thin and not threaded very far, forcing you to hang the screen so that it is suspended quite far down from the mount. The carabiner doesn't even fit in the front hole on the L-Bracket, despite the instructions including an entire section telling you that you can use the carabiner to suspend the screen from the front hole if you wish. Like I said, the brackets themselves are nice and I'm happy with how it looks now, but I had to buy sturdier hardware that actually fits to install this.

Excellent, prompt delivery

Funktioniert gut und erfüllt seinen Zweck. Durchdachtes Produkt!

Gave good flexibility to projector on not so straight wall. Very strong. looks a bit nasty, but it does what it's supposed to.

thought thy were expensive but see why now there up. theses brackets hold 25kgs easy and look quite good to .if you want 100 inch screen or more up on your wall theses are a must buy and i put 120 inch screen up in to plaster board and its perfectly holding glad i bought them now. thank you.

Excellent product , perfect for those who want their projector screen to drop down tight in front of their wall mounted tv . I am only giving 4 stars because of the poor hardware they provide . The screws are too small and look very timid and cheap . The bracket itself is of higher quality and the piece that connects the the bracket to the projector is very good . Change the screws to attach the bracket to the wall and you’ve got yourself a 5 star product .