Arrow 601 Gidget I Sew-Much-More Folding Sewing, Cutting, Quilting, and Craft Table, Portable with Lift, White Finish

I use my guest room for crafts and sewing, so space is at a premium. I wanted something that could be folded and stored away if necessary. This table is very sturdy and easily folds and unfolds. I have an older Pfaff 6091, which is a smaller machine, so I had to come up with a minor adjustment to the shelf that lowers for flatbed position: the shelf is adjusted higher or lower by screwing a wing nut up or down on a long bolt. I had it on the highest threads, but there was about an inch without threads at the top; I was able to raise the shelf higher by taking off the wing nut, putting a thick nut at the highest (unthreaded) position, then screwing the wing nut as high as it would go. This placed the shelf at exactly the right height for my machine. I quilt, so the 36" ruler on the front edge of the table is very handy and I've already used it numerous times today (I got the table yesterday). The table is a perfect size to place a few tools and necessities on it while sewing, but small enough that I will probably leave it up even when guests are using the room. It would be easy to put my machine in the closet and raise the machine shelf flush with the table surface to give the guests extra space to use as a desk. Overall, I'm thrilled with this sewing table and would definitely recommend to anyone needing a small sewing table. Update: I've been using this table for about a month now and love it even more! It's so much more comfortable and ergonomic to have my machine at a good height (lowered into the flatbed position). My back is feeling much better! Not having to set up my machine and tools in the dining room, then put everything away before dinner is a real game changer! My spare room is now my happy place all the time!

I just love this sewing table. First of all, I would like to again thank all the users that answered my question. My question was: I have a front load bobbin sewing machine and how difficult is it to change the bobbin? All stated that it was fairly easy to change the bobbin and they were right. -- This table is very sturdy. -- The drop down ledge is easy to manipulate and easy to align your machine to "just right." -- No more back and neck strain. -- The bobbin is a breeze. I usually have the machine closest to me by pulling the machine to the front edge. I sew away. When I need to change the bobbin I just push the machine to the back of the opening, slide the cover off, drop the bobbin door, reach right over and change the bobbin. It couldn't be easier. -- Sewing is smooth and clean. I have a little 24" x 30" folding table that I placed at the end to get the overflow of my quilt. I also purchased a small, 6-drawer on wheels, plastic cabinet that houses all my feet, scissors and other needs. This can slide under the table when I am not using it. I am in heaven. This is probably the best purchase I have made this year. The price is right and the product it great!

I rarely do reviews unless a product is really bad or as with the Gidget, really great! I having been sewing literally all my life and have had many different machines and cabinets. I usually put my machine on a table or desk but in searching for a way to do freehand quilting with as little repetitive strain as possible, I looked at many specialty tables. I did not want to spend $3000 on the fabulous Koala set up and I wanted something easy to set up. The Gidget at $119 through Amazon Prime looked like a good risk. I could not be more pleased. It was totally assembled right out of the box and even the height of the recessed platform was perfect for my Bernina 140 Patchwork Edition. I set it up next to the bed in my guest room (same height) and was sewing in less than 5 minutes. I have never had as comfortable reach, view and height of any previously used table. The table is on a tile floor, no rug and I ran the machine as fast as possible with little vibration. I will say that I can anticipate times when the cut out for the machine may be a problem as it does not exactly match. You can pay more for a wheeled Gidget 2 and cut out to exactly fit your machine. I will use a large sheet of clear vinyl with just a small hole for the feeds dogs. Other reviews have mentioned the roughness of the inside edges of the cut out but that is not an issue as it should be below the area where one is sewing. For the price of this sturdy table, you could cover those edges easily with table if you are bothered by it. Overall, this really inexpensive table is a perfect fit for my needs. Of course, with Prime, it was delivered quickly and I am hoping the Gidget will outlast me!

Super Tisch,hat genau die richtige Größe wenn die Bastelecke nicht so groß ist, Finde die Qulität gut. Nur die Versenkoffnung hat eine goßen offenen Rand der dürfte etwas weniger sein und sollte mit der Tischplatte abschließen. Wenn nur gebastelt wird muss eine Platte darauf gelegt werden, sonst fällt einiges durch und es kann nicht präzise gearbeitet weden.

Perfetto

Très pratique , très polyvalent , solide , bien fait , je la conseils fortement 👍

Excellent sewing table if you are looking for a cheap fold up table. Very stable with good work surface. Only problem is the chain supporting the base is only on one side and the weight of the machine pushes the other side down, we put a piece of timber on the base at the correct height and it works well.

I don't have a sewing room so being able to make this table flat and slide it under my bed has been very useful. Even after setting it up and taking it down many, MANY times, the table still functions as it did when it was new. The surface remains clean and undamaged and the applied ruler is still completely flat. I was certain it would peel off after a few years but it is as good as new. I have sewn heavy fabrics and lightweight fabrics on both my standard machine and my serger and there is little discernable vibration. I am moving to a place where I will have a dedicated sewing room (YEAH!) but will keep this table for my machine regardless - I just ordered the custom plexiglass insert from the Arrow company and am looking forward to many more years of use from this table.