M30 |WiFi 6 Speed 3000 Mbps |Covers Upto 2800 Sq. Ft.|Dual Band |Gigabit Port|AI Powered Mesh Router |High-Performance |360 Degree Spherical Coverage|MTCTE Certified

As a networking engineer, I’m usually skeptical of consumer-grade routers, but the D-Link M30 Wi-Fi 6 Mesh Router genuinely impressed me. Setup & Coverage: The installation was seamless took less than 10 minutes using the app. The mesh system eliminated dead zones across my 3BHK, with stable coverage even in corners where Wi-Fi usually drops. Performance: With Wi-Fi 6, speeds are consistent and optimized even when 20+ devices are connected. I tested video calls, gaming, and 4K streaming simultaneously zero lag, zero packet loss. Design & Build: Sleek, modern design that blends into interiors. It’s compact yet powerful. AI-Driven Optimization: The adaptive routing and AI features ensure the best channel selection automatically. No manual tweaking needed. For anyone looking at future-proofing their home, the M30 is an excellent investment. It balances professional-grade stability with consumer-friendly ease of use. Highly recommended!

The D-Link M30 is super fast and gives strong WiFi in every corner of my home. It connects well with multiple devices and keeps the internet smooth for streaming or work. The design looks stylish and it’s officially certified for quality. The AI app also has great upgraded features that make it easier to use.

Don't fall for it, design looks good and performance is worse. There is network issues in all modes after using this. My plan is 60 Mbps with BSNL fibre and baught it use on upstairs.. sometimes these router will show full speed and after 15 minutes - speed will be stuck at 3 Mbps or 9 Mbps. I have tried in range extender mode, router mode and bridge mode - all facing same issue. Sometimes speedtest will not even run and will show network issues and altogether browsing also have issue and laggy. To solve that speed stuck issue - we need to restart. Restarting every 15 minutes is not practical. This is very difficult explain to technition. Beware - you cannot return this. If you face same, then money gone. I still dont know how to make it work. This is on latest firmware.

I was looking for a router to run OpenWrt on, and the only WiFi 6 options I could find under 10k was the Asus AX53U and this one. This was a lot cheaper than the Asus (especially since I got it on sale), and had a much better processor and a lot more RAM. Writing this review after testing for almost a week. I didn't try the stock firmware, but it's working great with OpenWrt. Running 5 networks with 3 VLANs and 4 WiFi hotspots with no issues. Getting around 700mbps on a single client on 5GHz WiFi 6 when in the same room, and around 300-400mbps from other rooms. There are 5 small internal PCB antennas, like the ones on laptops. Not sure how the signal strength is vs the usual long antennas, but for a single floor, it should cover well enough without deadzones on 5GHz. I have set it to run at low signal power without issues. This is ideal for OpenWrt on a budget. The official build gives you about 28MB of storage for packages, and there's another build that merges the 2 OEM firmware partitions to give almost 80MB. That's a lot more than the 900KB I had on my Tp-Link Archer C6 previously. There is no USB on this, but for my purposes, 80MB for packages is way more than what I need. Also, it takes around 2 mins to boot on the stock firmware, and I was worried it arrived defective at first. OpenWrt boots in around 30 secs. Not sure what it says about manufacturer optimisation. There's a very chunky heatsink inside, and I'm not getting any overheating issues. Just make sure there's enough space around it for ventilation. If you need OpenWrt compatibility at a budget, this router is really good.

With Wifi6 (802.11ax) enabled, the range for 5Ghz is good and also for 2.4 GHz. On a 100 Mbps BSNL connection, I used to get 20-30 Mbps using deco m4. With this router I get 60+ Mbps at the same location using 2.4 Ghz. So definite improvement and mostly solved range issue for me. App doesn't have much setting options. For a normal user it should be fine. But someone who needs more advanced settings need to login to the web ui and play around.

D-Link M30 is super fast and gives strong WiFi in every corner of my home. It connects well with multiple devices and keeps the internet smooth for streaming or work. The design looks stylish and it’s officially certified for quality.

Bought a single router (no extra node for mesh) since this has so many features like WiFi 6 3000 speed, 4 LAN ports. great design and better hardware than similar priced routers. Build quality is rock solid. Single light on the router looks good. It's solid white when it's connected. At the same time it's difficult to remember what other colours are. It has red orange blue and white colours if i remember correctly and they can be solid or breathing. Performance is great in 5 GHz band. 2.4 GHz band gave around 70+ Mbps speed (expected. Laptops should connect with 2x speed.) in a budget phone. But the speed dropped to 10-15 Mbps in the next room although signal strength is good. This is worse compared to TP link C7 which gives around 40-50 Mbps. From simple analysis I found that wifi is locked at 20MHz bandwidth although it supports 40. Need to upgrade firmware to see if the performance improves. Otherwise this is only good for short range, or a house with lot of open space and a few walls. Buy it for mesh network and place each node in living room, bed room and all places where we need strong WiFi.

The router is very easy to setup, just make sure if you are messed up at any step just reset it and best thing is everything is handled by an app.. you can literally change passwords and configuration of router/extender based on your choices and best thing is that's it will give the analysis reports to users weekly bassis.