Plug Pads EZ Scupper - 3M VHB Tape Mounted Boat Scupper - No Screws or Sealants Required! - Transom Mount Only

Looks really cool, just does not work well

I’ve owned a few different types and brands of scuppers. They all work to some degree but if you load your boat up with weight by adding a jack plate, power pole and passengers, chances are that you are lowering you scuppers to rest below the water line. Ping pong scuppers work okay but they are plastic and one good summer of Texas heat will render the plastic brittle and eventually they crack. Even new they are susceptible to getting clogged with grass or debris and allow water infiltrate. These EZ Scuppers look more like the factory style but their design provides little to no water to infiltrate dependent upon where your scuppers sit relevant to the waterline. My scuppers are usually at or just below the waterline and they work really well. No scupper will be 100% effective if seated below the water line but these are by far the most easy to install and overall effective scuppers I have found.

Working great

There were good reviews on this product so I thought I'd give them a try and it turns out that they are better than I expected. This is a super high quality product that works as advertised. I was a bit skeptical that they would be effective in keeping water out, and their ability to eliminate water from inside the boat but they worked like a champ. Last, they look awesome on your boat...this is the kind of supper you'd typically see on boats from top tier manufacturers.

They look great. Super sticky 3M adhesive already mounted on scupper. My floor was instantly improved. No more wet feet while standing in the corner!

I bought a pair of these for a brand new boat ... so new, it doesn't have registration numbersI don't like the cheap plastic scuppers ... everything else on this NauticStar is first rate, and the plastic ones are adequate, but they don't suit me. Ii may have taken me twenty minutes to install these new ones, but only because I am so particular ... I took the old ones out, reamed the holes with a drill bit (just by fingers), wiped everything down with alcohol, filled the holes with Marine JB Weld, and then installed the new ones.To me, this modification was worth every bit of $40.

Easiest application and best quality. Good stainless material and great adhesive. I ordered plastic scuppers and they broke on me upon application. Wish I would have started with these first- the best for my application.

Installed 2 of these on my center console. Immediately solved the problem I had that the openings, which are underwater while underway let water in on the deck. These seal at rest or underway, while still allowing any water that comes onto the deck to drain. Adhesive is holding even while running boat at 30 mph