JOYJOM GPU Support Bracket, Graphics Card Support, GPU Bracket Brace, Video Card Sag Holder Bracket, GPU Stand, Adjustable Anti Sag GPU Stand for Fan Aluminum 129mm

Exactly as described. Easy to adjust and a secure fit

Case: Lancool 216 GPU: 7800XT reference (Sapphire Pulse) 140mm bottom case fans All the screw holes lined up, it secures in place pretty well, provides sturdy support, and is a nice addition to a black case. I love that it came with two longer screws for mounting through the fan and into the case as opposed to some crappy inserts that would leave the fan floppy on that side. I have the motherboard mounted in the lower 'water cooling' configuration. The pole sticks up about an inch over the top of the GPU. This means it would work well for the air cooled config too. If all you want is a fan mounted solution with a minimal offset to take the weight off your GPU, this will work. Put this thing in your cart and stop reading here. My end goal is to have a rigid anti-sag solution utilizing the four 4mm screw holes on the end of the GPU. The end of the GPU lines up a couple mm short of the center of the lower case fan screws. This design was the only one providing a minimal offset plus the freedom to attach the pole anywhere along the length of the fan-mounted bracket. The greater offset afforded by brackets with two sets of fan mount holes may be handy for anyone trying this with 120mm fans, but you will be limited by which holes will be useful on the end of the GPU. I appreciate that this listing included the 8mm pole diameter measurement. After some searching, it seems an 8mm "MSCF Sliding Bracket Guide" (google image search that) is the only other thing necessary to complete a rigid mount. Language barriers exist, so it may actually be a JSCF sliding bracket. I dunno. Amazon does not have any, and I'm ordering by picture. The GPU screw holes are ~21mm apart, so going with the 70mm length bracket guide.

I recently built a 5070ti setup and I noticed sag within a week, the fans on the card and on the bottom of my case made it quite hard to find one that will work, the normal cylinder ones would end up in my fan and break things. This actually bolts into your fan and then you can slide the entire thing back and fourth to position anywhere along the channel, Its built really well and dosent feel flimsy, it also doesn't attract attention to itself keeping your setup clean

Easy to install and easy to adjust.

Perfect fit for 120mm Lian Li fans, and fixed my GPU sag