LeeKooLuu RV Backup Camera HD 7 Inch LCD Monitor Wired Hitch Rear View System Adapter for Furrion Pre-Wired RV Trailer Camper Truck Waterproof Reverse Cam Infrared Night Vision G2

Monitor is better than expected with two inputs and multiple features only seen on more expensive monitors. Picture is great with options for backup lines selection on the monitor. Installation was easy and completed in less than one hour. Camera, housing, and IR nite lights are top rate. With the extra long cable that came with the kit, (no extra charge!) I can attach the camera to the back of my trailer to keep an eye on those tailgaters! Makes backing up with trailer attached easy as pie! Camera housing is heavy duty with multi-position bracket. It was easily attached to the receiver part of my receiver hitch between the bumper and the hitch with a large screw tightened hose clamp for easy moving to the back of my trailer when needed. Camera hides between regular bumper and receiver hitch. View is great for my 2003 Ford F150 truck that has no modern electronic devices like this. Comes with cigar lighter adapter (that has on or off switch built-in!) or can be directly attach with long, long length power wires to the backup lights for automatic use. A great buy makes me think I should have done this sooner! Thumbs-up for LeeKooLuu backup camera kit! First pic is the two inch rubber plug that comes out right under the drivers seat of my 2003 F150. Used a 5/8 inch hole saw that made a plug that fits back in the hole after the wires and connectors are fed through it. Ran wires under seat then along the console to the monitor that's mounted on a custom sales book holder. Next pic shows the mounting of the receiver hitch camera. Next set of pics show the mounting of the second camera which is one of the free items offered with this kit.

I've installed the camera system into a 1951 Willys 4x4 flatbed. It replaced a short-lived system from another company that used RCA cables for its one camera. The LeeKooluu system is – dramatically superior. For my setup, I requested by email and got a license plate camera to supplement the cube shaped camera that came with the kit.The license plate camera installed easily and features a colored rectangular grid that – at least in Willy's case – accurately reveals the distance between my bumper and what – I don't want to crash into. This is a dramatic improvement over my side mirrors that really don't stick out far enough to see behind Willy, and the inside the cab mirror, which is completely blocked if I have garbage barrels in the back.Currently, I have the cube camera mounted so that it looks onto the flatbed – but may mount it to allow watching my front 2” receiver while I am hitching up to a trailer, wood splitter, etc.Though I could have used their provided cigarette lighter adapter to feed 12v into the system, I just wired to a toggle switch. It also seems to be setup to allow for power up via the backup switch that powers backup lights on fancy new vehicles. On the toggle, the screen and cameras power up within a second – and the display is bright.The cables are four conductor video cables that thread together. To my surprise, these cables are available in a various lengths via Amazon if I weren't able to get them through LeeKooLuu, but they supplied me with considerably more than I needed... Each cable has 2 conductors for video and two for power. Simple. The connectors are splined, so they can only fit together one way. The spline location is also marked on the outside with tiny arrows that I colored with a paint pen. Double check which way the cables want to go, because the ends are different and it is possible to snake them through your vehicle before realizing that the wires are backwards and you have to pull it out and reverse it.Before plumbing the setup into my truck, I tested everything with the components loose. In that process, I determined what side of the cube camera is “Up”, and marked it with a Brother thermal label. Apparently, if I'd mounted the camera upside down, I could flip the image with a button on the display – but why bother with that extra step. Just determine which way is “Up” and label it. I labeled the license plate camera too. I also added a couple of labels to the wires. Why not?The 4 conductor cable ends are bigger in diameter than their RCA predecessors so I had to drill a 3/4” hole for them to pass through. No big deal. If I were hyper sensitive, I suppose I could have cut the wires, threaded them, then soldered them back together, but I didn't. I also note that the cube camera connector came with a rubber boot to help keep the connection dry. I like it – and might add a little silicone to seal the connector if and when I find a permanent mounting location for it. (I've thought about making it a mobile camera with magnetic mounts.)The mounting display-to-vehicle pedestal had me puzzled for a few minutes – until I realized that the piece that the wing nut runs through, is two pieces that come apart – not one. It is necessary to take that apart to fit it over the circular pedestal that it is designed to lock into. I found that this assembly pivots up/down at two joints (and in a circle), but did not tilt left/right. This was the only complexity that I encountered and it is a minor one. When I wrote LeekooLuu if I was right about the up/down only adjustments – they sent me another base that does adjust up/down and left/right. For free! Well, if these two mounting options weren't enough (and they are for me), I noticed that the base of the display has a threaded hole, so one can presumably fabricate a stud / lock-net setup for yet another mounting method.The display switches between camera # 1 and # 2 very easily with a light touch of a button on the far right side of the display. Super easy.I have only been running this for about a month, so I can't speak to longevity, but so far the components and their design all seem to be excellent.

I ordered this and had it sit around for a few weeks while I found time to install. I’ve had this on for the last week and it works great. I’ve emailed the company for the free license plate camera and it’s on its way. I mounted the small cube camera onto the roof of my Chevy pickup looking to the bed, and it’s helped a lot. It was easy to run the wires I mounted the screen to my dash and use the supplied cigarette lighter plug. I I se it as a full time rear view mirror. Screen visibility in daylight is decent with provided sunshade. And I’m able to see at night with the night vision. One thing that I’ve noticed, is the night vision switches back and forth quite often if I’m driving through town at night and pass under street lights, not a huge issue, but some may find it annoying as the screen flickers between modes, easily remedied by just turning it off. Happy with the purchase so far!

I ordered this based on recommendations from others, though I was hesitant as this RV backup camera system was about half the price of most similar systems I found through Amazon.It was delivered very quickly, and everything needed to make it work properly in a couple different configurations was included.I am currently rebuilding an 80s Toyota RV and this will be a key piece when done. I test fit the product and got to play around with its features today, and it works as expected. It is not the highest quality camera in the world, but it is perfectly adequate for what it is intended to do and has a night vision mode.Hook up was easy, and lots of extra cable and bits included to set it up in several configurations (On when in reverse or always on, 12v lighter plugin for power or hard wire into a 12v line with the included connectors).I'll be hard wiring it into a 12v line with ignition power so it's always on when the vehicle is on.The instructions were fairly clear, though poor grammar throughout (typical for direct from Asia products). That being said there are youtube videos available for this exact camera system so follow those if this is your first rodeo.Lastly, the seller is very responsive via email and more than willing to offer guidance and answer questions. You can also request a windshield mount for free from the seller if needed. So customer service is on point.

Great deal! Installed on my motorhome and the big 7 inch display is truly HD. It came with plenty of cable and the ability to add a second camera. Easy to install as well.

シガレット電源が使えて取り付けが簡単。思ったよりも画像はきれいでした。一番感心したのは夜間の画像がきれいな事でした。価格を考えるとお買い得感があります。耐久性に関してはこれからじっくり見ていきたいと思います。

Very happy with the quality and easy to follow instructions.We used this with our truck and fifth wheel trailer.

アマゾンの初回到着予定日の通りに商品が届きました。部品毎に梱包されていました。この商品は、安いイコール良い製品です。説明書のQRコードから手順動画に従いケーブル接続して取付前の表示テストも問題無し。室内取付を選択しました。写真の様にバックミラーの隣に同封のネジで止めました。モニターは、上下の高さ調整も可能でした。配線は、シートベルトを外してカバーに埋め込み目立ちません。モニターは、2ch可能です。DVDとか繋いでみようかと思います。プレイヤーの購入からです。この商品は、とても満足しました。有難う御座いました。

This is my second camera like this. It is great value and performs as described. I put the 7 inch in my wife's van to just make life easier getting out of busy parking spaces. One of the reasons I purchased this model is we really like control over turning it on and off manually with the enclosed lighter plug switch. No need to hard wire it in.My truck has one as well which is great for getting right under my trailer hitch.