KeylessOption Keyless Entry Remote Fob Uncut Ignition Car Key Replacement for GQ43VT17T, 04602260 (Pack of 2)

Fast shipping easy programming

Worked like a charm on a 05 jeep liberty. The owner lost the keys so I simply drilled out the old ignition switch replaced it with an aftermarket used the replacement keys to cut the chipped keys and programmed the keys and remotes to the vehicle. Works just like oem. Customer was satisfied and so was I.

Well like many other people I had only one keyless fob for my 2004 Jeeb and this was what I choose to assist with the problem. I read the instructions on how to program and it took me a few times to finally get it to work but when I followed the instruction to the "t" it easily programmed the fob. So my advice is to read three times and follow the instructions closely and you will get it to work for you too!

Amazon description says that you only need one functioning key in order to program yourself. This is NOT true so even if u can find someone to cut the key for you (many places won't unless you buy their key and pay the programming fee to them), these keys will be useless to you. They will start the car for a few seconds but than it dies. 2 working keys are needed to self program without paying the additional $65-$90 programming fee to the dealer or locksmith. I lost one of the 2 originals so I was S.O.L. Not many people buy extra keys unless they misplace one of the originals, but this guy will be making sure to have extras lol. Customer Service from RemotesRemotes immediately processed a 50% refund for my inconvenience without the hassle of having to ship back the keys...

Their website instructions didn't work on my '04 Jeep Liberty. Undaunted, a web search came up with a number of different combos, one of which finally did the trick. Don't be afraid to try something else if they don't work for you right off the bat. For my Jeep: 1 Press LOCK button 5 times at 2 second intervals to resynchronize remote. 2 Insert key into the ignition switch. Turn ignition to the RUN position (as far as you can go without cranking engine). Wait for ignition chimes to stop. 3 Using the working remote, press and hold the UNLOCK button on the remote for 4 to 10 seconds. 4 Within the specified 4 to 10 seconds, continue pressing the UNLOCK button and then press the PANIC button (on the programmed remote) for 1 second and release both buttons. A chime will sound to indicate that the remote programming mode has been entered ( allow 3 seconds for chime to sound ). 5 Within 30 seconds of the chime, press and release the LOCK and UNLOCK buttons simultaneously then press and release just the UNLOCK button on the same remote. A chime will sound indicating the remote has been programmed. Press and release the LOCK and UNLOCK buttons simultaneously and then press the UNLOCK button on each new remote you wish to program at this time. A chime will sound afer each additional remote is programmed. 6 Turn the ignition OFF and remove key. 7 Test Remotes. Now, on my rig, the first chime in step 4 didn't happen, but, following the next steps, the chime sounded as each fob was accomplished. Overall, these fobs are great! Next step will be to take the keys to a locksmith to see if the chip is programmable.

The remotes worked fine. Took both to get programmed as it was being difficult to do. It had nothing to do with the remotes it was the 2004 Jeep Liberty.

Make sure you have the ability to program your new remotes before ordering, or check with your local locksmith to make sure he can. Cut the dealer out of their ridiculous profit margin and treat yourself to dinner with the savings on these.

Key fob is top quality and was a blessing to find quality speed and dependability