Basketball Display Case with Solid Wooden Base,Clear Acrylic Basketball Case , with Removable Built-in Display Stand for Basketball

Perfect size for my volleyball, easy to put together with the only issue is that some of the clasps broke (they should include a few extra)Would recommend as a display case

If I could give it a ZERO I would. Cheap quality, the sides overlapped, didin't fit in the slots like shown in video. Deceitful. I had three different people assemble it and all came to the conclusion that sides were uneven and product was bad quality and design. I purchased 4 of these as a Xmas present to safekeep their basketballs. Had to throw them all away. Embarrassing quality

Good value, not the best construction but okay.

Putting these together is rough. The tabs constantly pop out and are hard to get a hold of. Once together we lost about six tabs as it was moved across the room. We had to reassemble it using super glue to hold the tabs together. Once the case is in place it looks great but I fear moving it again. Also one of the two I purchased had a slightly warped bass.

Nice

This product came fully disassembled. There were protective films covering both sides of all 5 sides of the cube. The film was terrible to take off, and that process took about 30 minutes. Even with the film, two of the sides still came scratched. The "pins" that you use to put together the clips are worse than flimsy. Good thing it came with 4 extras; I used 2 of the 4 while assembling the product and breaking them. It took two people for the entirety of assembling, as the in/out sides don't "clip" together, they just "fit" together. An hour and a half later, the final plastic cube did not fit into the grooves of the base. The one side just kind of gracefully sits on the lip of the base while the other 3 sides fit into the grooves. Why did I keep putting it together, and why am I tolerating the misshapen nature of the final product? Because returns are a hassle, and goodness knows what kind of junk the replacement might be. I'm only building a monster like this once. Two stars rather than one star, because the finished product doesn't look awful, and now my kid can display her souvenir ball.

Would not buy again didn’t fit together correctly. Ended up not using

I am not much into sports, but more of a sci-fy fan. I have a couple of helmets that have just been on shelves. This is a perfect size for them to now be protected and displayed.The assembly was not a very fun experience, and the instructions are missing most of the steps. This is what I would recommend:Layout all the pieces onto a table first. You will see they are not all the same. You need to find and set all 4 sides into the base and get them to "click" together if you can. There are 2 sets of metal fasteners. The "L" shaped ones go on the outside bottom of each of the 4 corners. The small pins (small black plastic that slide lock into themselves) must be the last thing you press into place, otherwise they become closed and can no longer be used. Repeat this process for the 4 top corners. Once all the pins are set, you can lift the clear case off the base to put whatever you want to display inside. Then place the top back over it and you are all set.The finished product is really nice, but as mentioned, the instructions need a lot of work. Thankfully they provided several extra pins, or I would not have been able to complete it.