Meta Online 1.5 Grams Liquid Metal Thermal Compound - 130W/m'K Conductance - Thermal Grease - Ready to Apply for PS5 - CPU - GPU - Liquid Metal Thermal Paste

The original high performance kpx thermal grease on my processor dried out after 3 months causing my my temps to sky rocket 20 degrees prompted me to look for a more permanent high performance solution to cooling. Liquid metal was the clear choice but all the leading brands were charging a kidney for their product, enter Meta Online. Same exact liquid metal performance and temperatures at a fraction of a price. My water cooling block was made of bare copper so I had to prime the surface with an extra coat so it would absorb the first coat before I applied a second coat and slapped everything together. Make sure not to apply too thick of a layer, you don't want the metal dripping onto your expensive components and destroying hundreds of dollars worth of gear. Average temps dropped from a toasty 50 degrees idle to 30 degrees and hence my cooler was much quieter from not having to work so hard to keeping the cpu cool. If you're overclocking and you're thermally limited, this is a must have upgrade to functionally increase your clocks!

The heat exchange was excellent and it wasn't too difficult to apply. It managed to handle my 14900K using the Bykski budget water block at around 300W with a 0.15V undervolt.

Decent packaging and gets the job done. Would have been nice with maybe one or two extra alcohol pads but was manageable none the less. Applied the fresh paste and haven't had any cooking issues thus far.

Well worth the price! Ive used for a few PS5 and it has kept them from shutting down due to overheating.

Mejora la conductividad del calor aunque todo dependerá de la eficiencia de tu sistema de enfriamiento. Tenga en cuenta que la primera vez que vaya a usar la jeringa puede salir más de lo necesario así que siempre empuje el líquido suavemente.

Its actually probably better than conductonaut. I literally couldn't get my cpu to go over 60 degrees in stress test after putting it on, and I think the cooler was at like 50% power. It's absurdly chilly. And, it seems to like stick to a die better. Slightly less pooling and probably also less film-forming. Solid for dissolving solder too. Not very runny or anything. Didn't even nail polish/kapton tape the lil resistors around the GPU die and I've taken the card out a few times and plugged it back in and moved my computer around and no issues with it leaking out, checked that at least once. Removing excess is also pretty doable with a regular q-tip, just gotta get the first drop into it and then it'll pick up more pretty easily. Seems *absolutely* legit to me. Oh and pro tip if ur gon delid a CPU that has solder on it, use a hair dryer with a thermometer on top and cook that s*** to 70-75 degrees C first. I did mine to 80-85c and it may or may not have been slightly too hot but hey I'm on some 6ghz gaming ova here Two thumbs up, the metal is good 👍 👍

Used as directed. 25 yrs PC repair experience. May have just been a defective tube, a one off issue. But did not bond with the chip, no adhesion, just dropped right off. Will try again, but this didn't work for me

Holy lord I've never tried liquid metal before but this just lowered my hotspot temp on my 7900xtx nitro on water by 30 degrees. 30 DEGREES. no joke. This stuff is gold and cheap

Genau das was ich gesucht habe für die ps5

Llegó en tiempo y forma, me funcionó de maravilla, solo falta ver el rendimiento a largo plazo, de allí en fuera todo excelente ✨

Je l’ai utilisé sur ma ps5 qui surchauffer sur certain jeux. Ce n’est pas comme de la patte thermique alors faites attention lorsque vous le ferais couler. J’ai préféré l’étaler délicatement plutôt que de mettre une goutte au milieu car c’est vraiment liquide. Ma ps5 fonctionne correctement, sans faire de bruit et sans chauffer sur les jeux les plus gourmand donc c’est tout bon.

Conforme , je l’ai acheté en prevision si un jours ma ps5 surchauffe j’aimais mieux l’avoir en ma possession et pouvoir le faire immédiatement si cela arrive . Donc pour le test du produit ce seras une autre fois.

Using it on my 9950x3d direct die and its better than Conductonaut and Conductonaut extreme by 2c. Also way easier to spread. Will Buy again.