2 Pcs Brass Locking Tire Air Chuck, Tire Inflator Hose Adapter for Twist On Connection Convert to Lock On, No Air Leakage Air Compressor Pump Clip On Tire Chucks, Tire Nozzle with Tire Valve Thread

I’ve used these on a recent camping trip to air down my tires using a deflator tool and on the air hose from my compressor afterwards. They made attaching to the tire very simple requiring just one hand. They are built very sturdy, fit well, did not leak and easily handled the amount of air pressure to inflate my truck tires. Overall they worked great.

I rate this air chuck BETTER than the "equally popular" (and also pretty good!) "lever-lock" air chuck for one reason: the "lever lock" chuck requires TWO HANDS to install on the air valve, whereas this chuck needs just ONE HAND to install on the air valve!As for "air leakage": the "lever-lock" chuck allows more air to leak on installation (once "locked down", there is ZERO "leakage" :) ). However, this chuck does allow a VERY SMALL amount of air leakage after installation, but it isn't enough (IMO) to be a problem while filling the tire.Finally, the "lever-lock" chuck requires "finicky positioning" to clear the rim on auto tires for installation to the air valve. This chuck is a "straight-on" install to the air valve, saving time and effort.Some have complained about the "durability, etc." of this chuck. At his time I cannot "corroborate" those claims as the ones I received seem to have "stout" construction. Time will tell about the "durability, etc." of the ones I received and, if anything changes, I will provide information. :)Summary: I like these air chucks and DO INDEED recommend them.

Intuitive and fits the air hose on my tire inflator. My tire inflator air hose screws onto the Schrader valve stem of my car tires. The problem is that once the tire is inflator, too much air is lost from the tire while disconnecting the screw-on air hose from the Schrader valve stem. This device should eliminate that problem as it can be disconnected from the valve stem very quickly.

A bit loose and doesn't snap well onto the tire all the time. Have to manipulate. But a workable solution renders much more ease to pressurize the car tires.

It’s exactly what I needed to be able to check my tires. Super easy to use and feels strong and well made.Recommend

My Ridgid inflator (great inflator by the way) has a plastic air chuck. The plastic air chuck works good and locks on tight, but it is kind of finicky to use. By adding this brass air chuck, my inflator is now perfect. No leaks, locks on tight and is super easy to use, even one-handed.I ordered the two pack so I can put one on my Milwaukee M18 inflator (even better then the Ridgid, but 5 times the price). This brass air chuck works just as good on the Milwaukee inflator.My only complaint is the air chuck is threaded into the a "tire valve" threaded stem. Those two pieces were not tight. I had to tighten them up. Not a big deal, just thought I would mention it.

Big improvement over original part which I had to hold on tire valve, locking apparatus no longer worked. The new one simply locks onto the threads of the valve stem, works great.

One of them works perfectly fine. The other one apparently got squashed in a press. And is deformed non usable. Not worthy of the hasslereturning though.

Práctica y sin ser un aditamento que le de más volumen a la manguera y así al guardar el compresor no haya necesidad de quitarla. Facilita muchísimo el inflado y sin perder aire en la llanta.