O-Ring Rebuild Repair Kit,for Pentair SuperFlo and SuperMax Pool Pumps Parts, Includes 2 Pump Union O-Rings, 2 Drain Plug O-Rings, Water Slinger, US Seal PS-200 Shaft Seal, and O-Ring Lube

I have a 6 year old SuperFlo VS Variable Speed Pool Pump. I didn't even realize it had all of these seals.When I took it apart it was clear which seal had failed, but it was obvious that all of the others were going to give way soon.So my advice is to go into this project with the intention of replacing all of the seals.You will have some leftover, but I assume they are for the other models.It comes with instructions, but first watching a video on youtube helped.

This kit included all the necessary seals including the water slinger and the silicone package. All fit perfectly and after replacing the bearings, the motor runs quiet and smooth. No leaks whatsoever. Take your time installing the ceramic seal. Directions were included and helpful. Remember to use soapy water for an easy installation!

Listing states: "Easy to Use: Our kit comes with easy-to-follow directions, so you can quickly and easily replace your old O-Rings and get your pump back in action." Also seems that there is no way to reach seller for support.

Perfect fit

This product was exactly what I was needing. Seller had amazing details about the rebuild kit.

My 2016 SuperFlo (342001, older model) started to leak. Took it apart, cleaned everything, used the seals from this kit, assembled all together. Everything runs well, no leaks, the pump is quiet. I suspect that two-part shaft seal was the cause. The instructions in the kit are not enough, unless you know what you are doing. I recommend to read the owner's manual (these a section on servicing the pump) and watch some YouTube videos, there are ones from PentAir. It is not difficult. Make sure you have strap wrench, because it may be difficult to remove the plastic impeller with bare hands.

This kit had all that i needed to replace my pool pump motor

all parts were there and fit perfect