This Free Standing inline automatic chlorinator will work for either in-ground or above ground pools. Large capacity 4.2 lbs. tank will accept 3 inch Chlorine tablets. The chlorinator is fully adjustable so you can regulate the speed at which the tablets dissolve, depending on your pool's chlorine demand. This unit is made of heavy-duty resin. This In-Line Chlorinator is designed for permanent installation in the pool water return line. Review: I have had this in use on my Intex Ultra 9ftx18ftx52in pool for a few months now and very pleased so far. Seems well built and no issues with leaks. You will need to buy some additional hoses to plumb into your current pump system and will also need a stable mounting system, I just used some pressure treated lumber to build a small base and attached the feeder with two stainless screws. I have the feeder adjustment knob set on approx the 1/2 setting and add one 3in chlorine tablet every 4 days or so and this seems to work well and keeps the chemistry where it should be. Review: Arrived promptly and installation was very easy. Hardest part of installation wad going to lowes to get pvc’s needed, pvc primer and glue. I would buy it with the device next time.. Otherwise all that was needed was a hack saw to fit auto chlorinator to existing lines. I’ve had it running for a couple of weeks, no leaks and seems to be running well. I would recommend wrench to remove cap to add chlorine. Not sure about efficiency yet but chlorine levels improving.
| ASIN | B007NZPMOO |
| Capacity | 1.91 kg |
| Customer Reviews | 4.2 4.2 out of 5 stars (241) |
| Date First Available | 20 July 2014 |
| Item display weight | 1.36 kg |
| Item model number | ACC-CHLR-AUTO-I4 |
| Manufacturer | Sunsolar |
| Part number | ACC-CHLR-AUTO-I4 |
| Product Dimensions | 38.1 x 22.86 x 15.24 cm; 821 g |
J**S
I have had this in use on my Intex Ultra 9ftx18ftx52in pool for a few months now and very pleased so far. Seems well built and no issues with leaks. You will need to buy some additional hoses to plumb into your current pump system and will also need a stable mounting system, I just used some pressure treated lumber to build a small base and attached the feeder with two stainless screws. I have the feeder adjustment knob set on approx the 1/2 setting and add one 3in chlorine tablet every 4 days or so and this seems to work well and keeps the chemistry where it should be.
J**R
Arrived promptly and installation was very easy. Hardest part of installation wad going to lowes to get pvc’s needed, pvc primer and glue. I would buy it with the device next time.. Otherwise all that was needed was a hack saw to fit auto chlorinator to existing lines. I’ve had it running for a couple of weeks, no leaks and seems to be running well. I would recommend wrench to remove cap to add chlorine. Not sure about efficiency yet but chlorine levels improving.
L**Y
tres bons
N**A
Product does not come with nor do they sell the double male ended connectors to connect the device to the outflow of the pump and the pool inflow. I made 3 purchases before ordering from plumbing supply as suggested by the company, and even with plumbing tape and waterproof tape on top it still leaks. I contacted the company directly and they were no help at all. I have an above ground pool with standard hoses, and this seemed like a good idea. Even with the leak I figured it might help keep my pool clean. I put in the suggested pucks and it makes no difference at all. even open all the way my chlorine level is too low and I followed all the instructions etc. DONT WASTE YOUR MONEY
J**M
My elderly parents purchased this unit for their 25000 gallon pool. Unfortunately it was rated for only 13000 gallons and the connections from the filter were too small. Looks like a quality, well made unit. Perfect for a small inground, or above ground pool. If that's what I was working with I would have installed it. These are real easy to install and use. Takes alot of work out of maintaining chemical balance
TrustPilot
4天前
5天前
