Permatex Rearview Mirror Adhesive, Adhesive .3ml/Primer .6ml (81844)

I bought this to remount the mirror in my 2010 F150. I had to purchase a second pack because, like and idiot, I mounted it upside down the first time - even after taking extra precautions to make sure it was oriented correctly too. Oh well. One thing to note, there is no "adjusting it into position" after it's in place. Once you touch the mirror mount button to the windshield it sticks pretty much instantly. Other than that mishap the glue works well and is easy to use. It comes with everything you need to do the job other than a blade to scrap off any old glue. The instructions are good and if you follow them you should have no problems...well as long as you have the mount in the right direction that is !! The entire process takes maybe five minutes. Note: If you do happen to make a mistake, you can remove the mount buy heating it up. I used a long igniter and it took only a few minutes for it to come loose...so I could go at it second time.

I normal wait a little while before I write my product reviews just to make sure the product doesn't break or disappoint after a week...However, this product works just as fast as it took to open the packet and read the instructions. I don't know what type of chemical adhesive reaction is created after this product touched the glass but I could tell INSTANTLY that the permatex was working and this was the correct purchase option. I even dropped the metal hanger and the oil adhesive did not stick to me or my clothing. It wiped right off. But when I re-applied it and placed it on the activated area of the windshield glass it bonded immediately. Incredible! I naively tried to hang my mirror with other adhesives first which all failed, and I wish I would have just used permatex to begin with. Still its done and I'm more than happy with the results. Best $4 I've ever spent lol!

Followed instructions to the letter. Fell off 10 days later. It was not exposed to any unusual conditions.

I do not have a garage so the rear-view mirror is almost always facing the sun in the daytime. In the Summer the metal will get too hot to touch but this adhesive has lasted 5-7 years in the past. Critical step is to make sure both surfaces are clean, and make sure the surface of the mirror mount is flat and clean. I use a medium and fine grade of sandpaper on a hard flat surface; simply sand the mirror mount surface and rotate it as you sand it. It will be better than it was at a minimum. Then follow directions for the product and wait 24 hours if possible before installing the mirror weight onto the mount.

After some of the reviews I was a little concerned that this wouldn't work. It works great! Tips: Mark the top of the "mirror mounting button". (Red arrow in photo points to mirror mounting button) When you re-install the mirror mounting button it is important that it is right side up and the smooth side faces the windshield. The second photo shows the obverse side of the mirror mounting button. This is the side that I see after I install the mirror mounting button. Separate the mirror mounting button from the mirror. It is either plastic or metal. You will need to find instructions for your vehicle in your favorite search engine. Sometimes it is a "set screw". On my vehicle (Chevy S10) it is a spring loaded friction mount. I firmly pressed a small screwdriver into the lower left slot and the mirror mounting button slipped right out. I did bend the spring back out a little so that it would grip the button firmly. It is tempting to leave them together but you won't be able to hold the mirror stationary and it will fall off. Put a piece of tape on the outside of the windshield in the position where the mirror mounting button was located before it fell off. You will use it to position the mirror mounting button. Clean clean clean. Make sure that the windshield and mirror mounting button are clean and smooth. I used a paint scraping tool (razor blade) to gently remove the old glue from the windshield and get smooth surface on the mirror mounting button. Follow the directions on the package. The temperature of your windshield and the mirror mounting button are important. The little envelope is an alcohol swab. It helps clean residue from windshield and mirror mounting button. I installed mine in the afternoon about 70F in the vehicle and let it set overnight. In the morning I slid the mirror back onto the mirror mounting button. It is still mounted. Cheers

My rear view fell off so I bought this kit because the reviews were pretty good cleaned my glass really good with a razor alcohol glass cleaner then wiped it with a dry clean towel then cleaned the button and corse sand paper used a sharpie trashed the out side old button mark before I cleaned the glass did everything the directions said to do the only thing I did different is I let it set for 7 hours will see if she holds probably should wait a few week to review so that 4 star is not accurate only time will tell good luck at least the price is good 👍🏻

bought for someone else..

I was hoping for five stars coming from a name brand as in this company. However, the product failed to hold and my mirror fell off again. I did all it said in the instructions too. I even tried 3M and lasted a little bit longer then came off as well. Got to find out what my cars manufacturer uses, hopefully then it will stay put for good.

Perfect adhesive for rear view mirror. I recommend this one. Very good result.

This worked. I tried many methods to glue my rear view mirror and failed. this product worked!

Worked well for glueing metal to glass

This product is not doing its job. I bought it trusting the product description to stick my rear view mirror on the windscreen glass. I did it as per the instructions but it came out next day. Really i don't recommend because you can't return the item as it is a glue for 1 time use. I will raise a complaint to Amazon.

No lo recomiendo, seguí las instrucciones y solo duró un día