Elevate Your Outdoors! 🌟
The Neorexon Pergola Kit is a premium outdoor solution featuring robust 2mm thick steel brackets designed for 4" x 4" wooden posts. With easy installation and exceptional rust resistance, this kit is perfect for enhancing your garden, gazebo, or pergola, ensuring a stylish and durable outdoor space.
| Product Dimensions | 20.32 x 10.16 x 10.16 cm; 15.74 kg |
| Part number | Pergola Kit |
| Material type | Wood, Stainless Steel, Carbon Steel |
| Power source type | Manual |
| Manufacturer | Neorexon |
| Item model number | Pergola Kit |
| ASIN | B0BWQN25LQ |
C**M
Excelente
Realmente valen la pena
T**Y
Recommend - good value with a few need to know points
I am very happy with the overall outcome, but there are a few keys things to be aware of:1. The frame on the foot for the posts is not always squared so when anchoring the foot, look at the position of the frame over the bottom piece.2. The anchor pieces do not align to the US metric system so a 3/8” bit was too small and the 1/2” bit was too big. I ended up purchasing my own anchors.3. Have a lot of shims available. Depending upon the width of the wood, you may have a lot of spacebetween the wood and the frame. This can affect the leveling so shims will be extremely helpful.I am happy with the end result. Overall it looks really clean and sharp.I modified 4 of the 3 way pieces to slide them over a single post so I could expand the pergola with multiple heights. This turned out well too (would have loved to have found a pre-made option for this).Overall I would recommend this product for the value.
C**E
Super sturdy
I was suprised when the package came and I opened it. They were surprisingly very heavy and this will definately hold the 3 x 4 very well. Can't wait for them to be installed.
J**S
It work, room for improvement.
The holes on the bottom post are on the same line from all the same sides. If you don't mind incidental contact with your screws then it's ok. Unfortunately, my screw got bent because there is another screw took that spot on the other side already. In addition, 3.6 leaves a lot of gap on the post. Another thing to consider is the bottom post is literally just a plate with a hole in it, so I'm not sure if it needs to be elevated so the wood doesn't get water damage. Another thing to consider is if you're thinking of putting a 4x4 skirt cover you might not be able to because it has the little triangles support in the middle.
M**R
Too big for a 4x4 post, sloppy
The media could not be loaded. These have a 3.75" inner diameter. A 4x4 post is actually 3.5" x 3.5." These are really sloppy on a post with a lot of side to side movement. I'm guessing the metal is thin enough to bend in when screwed, but I'm not stoked and would not buy these again.
