AMVR VR Facial Interface Bracket Face Cover for Pico 4/Pico 4 Ultra/Pro,Replacement Pad vr Accessories,with PU Face Foam Pad Replacement, Anti-Leakage Nose Pad & glasses wipes

This 'interface' does the job, is comfortable to use, improves FOV and cuts out a little more light than the original. It's not a bad product at all. Value for money is a personal evaluation and opinions will always vary but this product does what it claims to within a limited market. After contact with the seller, I can also confirm that their customer service is excellent.

Swapped out stock gasket for this and it does the job. Blocks out 99% of ambient light, you get a smidge from the vents but you have to really look for it. It is comfortable but does get a little clammy after a while causing the lenses to fog up occasionally. The only negative is connection to the Pico. Sometimes it snaps on first time, mostly I have to fiddle and wiggle till it fits. It's staying on however coz it works well.

I'm going to be straight talking here. The original is an uncomfortable nightmare (to me). This bit of kit was a godsend. It is very comfortable (to me). I can wear it for longer periods. I can now tighten the headset properly as I do not have to relieve any undue pressure around my upper face like with the original. This should be standard. Who the heck tested the originals? and then said "yarp! good to go". Excellent product.

I was really surprised how much better this was compared to the original fitment, it's much softer, easier to clean if you have a sweaty session, eliminates the light bleed around the nose which I got on the original even with the nose cover. But the biggest surprise for me was that it allows your eyes closer to the lenses. It drastically reduced the blurring effect on the edge of the lenses. The only negative I can find with them is the fitment to the unit isn't as tight as the original, so it can easily pull away, but it's a small negative compared to how much of an improvement it is.

Seems well made. Tried it out and it's a bit more comfortable than the original but found that there was still some light bleed. Not worth the price for so little benefit.

Good fix

Please review this video if you have given up on this as too uncomfortable regarding nose pinching and nose irritation. I take no responsibility for any amendments you may try as all our noses and face structures differ. The manufacturer could resolve this in newer models. I now have complete confort and total blackout with this method.

So much better than the original that comes with it; more comfortable and does eliminate some of the light leakage. With some extra velcro strips placed between the cushion and the plastic frame at either side, the light leakage is almost entirely gone. FOV is greatly improved too. Not particularly cheap but it does improve the VR experience.

HMDはどうしても額に汗をかきます。 PICO4純正は肌触りは良いのですが、汗を吸うので（ある意味快適ですが）汗染みが付く。 洗っても染みは残るのが気になっていました。 PUレザーは汗を吸わないので水滴が残りますが、逆に簡単に拭えます。 また、シリコンカバーを当てるよりも使用感は良いです。 AMVRのパッドはフィット感もよく、目がレンズに近寄るので視野が広がり没入感も向上しました。 私はスペーサーを併用していますが（まつげが当たるので）

Fácil de utilizar guardar y limpiar, perfecto para las pico 4, no te arrepentirás de adquirir

Ich habe kürzlich das AMVR VR Facial Interface Bracket Face Cover für meine Pico 4 VR-Brille erworben und bin beeindruckt von den Vorteilen, die es mit sich bringt. Komfort: Die AMVR-Gesichtsabdeckung bietet einen deutlichen Komfortgewinn im Vergleich zur Standardabdeckung. Das weiche, angenehme Material fühlt sich auf der Haut sehr angenehm an und minimiert Druckpunkte, die bei längeren VR-Sitzungen auftreten können. Die Polsterung verteilt das Gewicht gleichmäßiger und hilft, Ermüdungserscheinungen und Beschwerden zu reduzieren. Das Upgrade auf die AMVR-Abdeckung führte zu spürbar längeren, bequemeren VR-Erfahrungen. Hygiene: Die hygienischen Aspekte des AMVR-Produkts sind ebenfalls bemerkenswert. Die abnehmbare Gesichtsabdeckung ist leicht zu reinigen, was besonders wichtig ist, um Schweiß und Verschmutzungen fernzuhalten, insbesondere wenn die VR-Brille von mehreren Personen genutzt wird. Die Möglichkeit, die Abdeckung einfach zu entfernen und zu waschen, trägt zur allgemeinen Sauberkeit und zum Wohlbefinden bei. Passgenauigkeit: Die Gesichtsabdeckung wurde speziell für die Pico 4 VR-Brille entwickelt und passt perfekt. Die Installation war einfach und erforderte keine komplizierten Schritte. Die Abdeckung sitzt sicher auf der Brille und verrutscht nicht während der Nutzung. Dies gewährleistet eine klare Sicht und ein optimales VR-Erlebnis. Belüftung: Ein zusätzlicher Vorteil des AMVR-Produkts ist die verbesserte Belüftung. Die spezielle Gestaltung der Abdeckung ermöglicht eine bessere Luftzirkulation und hilft, das Beschlagen der Linsen zu reduzieren. Dies ist besonders wichtig, um das VR-Erlebnis ohne störende Unterbrechungen zu genießen. Design und Haltbarkeit: Die AMVR VR Facial Interface Bracket Face Cover ist gut verarbeitet und widerstandsfähig. Das Design ist ansprechend und fügt sich nahtlos in das Gesamtbild der Pico 4 VR-Brille ein. Fazit: Das AMVR VR Facial Interface Bracket Face Cover für die Pico 4 ist ein lohnenswertes Upgrade für jeden Besitzer dieser VR-Brille. Der gesteigerte Komfort, die verbesserte Hygiene, die Passgenauigkeit und die Belüftung machen es zu einer sinnvollen Investition. Die Gesichtsabdeckung trägt dazu bei, längere und angenehmere VR-Sitzungen zu ermöglichen und gleichzeitig das Wohlbefinden und die Sauberkeit zu fördern.

I got this facial interface a few days ago, it is better then the stock Pico 4 one but not perfect. Depending on head shape, I still get light leakage from rear sides, if I shift the headset on my head a bit, then I can get rid of most of the light bleed. This is the 1st AMVR facial interface I've bought (I've had many for various headsets in the past) that only included the thin facial pad, all other's I've had also had the thicker pad. At the price of this thing (most expensive AMVR Facial interface I've ever bought) you would think they would include the thicker face pad. I think the Pico 4 would have been even more comfortable with the thicker face pad. Better than stock, but could be considerably better, something a thicker face pad might have fixed.

The original Pico 4 face cover is not that comfortable for my face and the material is somewhat rough when it touches your face. I first purchased the Geek VR face cover which is very nice and comes with 2 covers. Problem was that it was too close to my face and my eyelashes kept on touching the lens. Then I saw this cover from AMVR and purchased it. This is the most comfortable face cover you can get so far, at least for my face. It fits perfect and I am able to keep it on for hours in excellent comfort. It is a big game changer in my enjoyment of the Pico 4. The material is very soft and it comes with an installed nose pad (clip on) and I have 0 light bleed. If you do not like your current face cover you will not be disappointed with this one.