EVO-STIK Flooring Adhesive 2.5L - High Strength - Water Based - Rubber/Resin Glue for PVC - Cork - Linoleum - Carpet & More - Solvent-Free - Indoor Use - Fast Setting - Ready to Use

A bit messy, but good stuff

Good flooring adhesive

Pleased with the results.. I used on vinyl floor tiles and the end result is good. It did take over 24 hours to dry and was quite messy. This did mean when flooring was laid the tiles could be easily moved and manipulated into place. However. I couldn’t not use the bathroom so had to walk on flooring before set and the tiles continued to move during this time and had to be realigned constantly. Would definitely recommend using on a floor that could be left uninterrupted while setting. Every time I walked on floor residue would squeeze out between tiles and this was sticky and looked messy. A few days on they are set firmly in place and all residue cleaned away, but the process was a bit messy and laborious.

Well, I was stuck, really couldn't find anything to stick my vinyl to my wooden floor. Tried two different well known brands of adhesive neither of these done the job, then I tried Amazon!! Don't get me wrong, when I saw the 837 I was definitely sceptical but read the reviews and went for it. Unbelievable!! What a brilliant product, so easy to work with and really effective. Don't get me wrong, yes it is really sticky stuff, can also be really messy no doubt about it but I took advice from some of the reviews that I studied beforehand and cleaned up as I progressed and it was no problem. I used a paintbrush to apply and put it onto only one surface which worked perfect with little or no mess at all. My advice would be try first on on a cutting or spare piece before doing the the job and don't apply too much.! Sparingly and evenly made it easy for me, clean up with a damp cloth as you go, wash any tools when finished. Simple but effective, really chuffed!!!

Great product

Well this does do the job, but 2 hours dry time? - optimistic at best. I have worked with many adhesives and sealants but I have to say this has to be one of the most awkward and infuriating I have come across.I used it to fix vinyl planks to a synthetic coated insulated floor. I followed the instructions for the first plank, this was a huge mistake. The tile oozed out glue everywhere and sat far too proud, I had to scrape virtually all the glue off. The glue is extremely sticky, you only need a very thin coat not the liberal amount recommended. I found that you had to put on very little and comb it out with the provided scraper. You must clean down as much as you can as you go along, this stuff smears everywhere, I used a cloth covered in sealant remover, this seemed to work well. (TRY IT ON A SPARE PIECE FIRST TO ENSURE IT DOES NOT TAKE THE COLOUR OUT OF THE TILE) Also mind that this glue is supposed to dry in 2 hours, absolutely not. It took 10 days before the tiles were anything like set, this was in a room with an ambient temperature of around 17 degrees. Up until this point glue oozed from the seams as soon as any pressure was applied. On the plus side once the glue had set, it was solid. It dries to a brown finish which for me as I laid light oak coloured tiles was a bonus For ease of use and drying I would rate this glue 1 star, but because it did eventually dry and stick well I have pushed it up to 3. If I ever had to vinyl tile again, I would certainly be looking for an alternative.

Seemed to work well Installing altro flooring in my van. This size tub was needed for a lwb transit, and provided ample adhesive, I wouldn't try and stretch the smaller tub for a lwb. Hope that helps another van converter as I had no idea what to use 😅 It came with a mini spreader but I didn't realise and had ordered a bigger one at the same time.

First off. The useless piece of plastic film inside that ends up half submerged as the product is not kept upright during transit. Leave it out. OK now onto using it. I fixed Karndean tiles ( see photo) on top of other Karndean tiles. Reason being they were part of a bigger area and this is a new downstairs lavatory, and the existing tiles didnt match. I took the advice of another reviewer and used a paint brush to apply a fairly thin coat onto the old tiles. Forget the spreader. Too much adhesive allows tiles to move about and as some have said make it ooze up between the joint. So I broke all the rules including using 3mm tile spacers. I started in the doorway so I was kneeling on a pad on the tiles I had just laid. Not a problem. I only applied the adhesive to the area of each tile as I worked. Slapped them down with the palm of my hand. ( a hard roller would have been an asset) Left them for about 4 hours then walked carefully all over them. No movement. So the next rule break. I grouted them with waterproof tile grout. Pressed it down well into the gaps. That will also adhere to the tiles and keep them in place. I am happy with the result. Tomorrow the pan and washbasin will be installed. Its all about how you use it. Just got most of a tub left. This size tub would cover a huge area applied in the way I have.

Très bonne colle, mais je me suis fait un peu surprendre car je ne pensais pas qu'elle était à prise très rapide heureusement que j'avais un peu prévu. Il faudrait une notice en Français Cordialement. Yves Brillaud.

Ottima colla ho incollato alcune piastrelle da decorazione , buona presa.

Lo compre para reutilizar unas lamas autoadhesivas que no se pegaban , en total fueron 24 lamas y a sido la mejor compra que he podido hacer. Va perfecto, cuatro días y nada que objetar , todas las lamas pegadas perfectas. Es una cola genial incluso con un pincel como yo lo hice. Recomiendo este producto 👍👍

Usata per piastrelle

Colle pour linoléum super efficace, avec sa petite spatule en plastique. Tellement bien qu'on en a commandé une nouvelle fois.