OFFICENTER Compatible Printer Cleaning Kit, Printhead Cleaning Kit for Epson, HP, Canon Inkjet Printers - 100ml

I watched a YouTube video about how to clean the print heads on my Canon 3260 tank printer, then I bought this kit. The cleaning went so-so, but this kit worked great. Pros: Tubing fits snugly on the syringe tip, there’s plenty of cleaning solution to do multiple cleanings of all of the nozzles on the print heads, and the cleaning was a success. Cons: The kit didn’t fix my print issue, but I don’t think my problem is with the kit. The problem I seem to have is getting the ink back into the system properly after cleaning. I did a printer deep clean, then an ink flush, and still the prints are more streaky than before I used the kit. I may end up buying new print heads anyway. EDIT: After running two more deep cleaning cycles on the printer, I was FINALLY able to get the ink flowing properly again, and my prints were PERFECT. So this kit 100% solved the clogging and cleaned the print heads. You just might need to run 4+ cleaning cycles afterwards, to get the ink flowing properly.

I only needed the syringe, the tube, and the solvent. I pushed about 10ml of the solvent through my totally clogged cyan print head (into a paper towel below), then ran the printer's head cleaning and nozzle check 3 times, and my printer was back to working perfectly.

Kit comes with everything you need including gloves. Used it on an HP8620 to clean the printer head as I was getting the printer ink system error. After cleaning the print head everything worked.

I used the cleaning kit on my printer three times in two days, but THE PRINTER still would not print, so I am assumed the Printer was not ever going to work again ... so I bright a new one! the kit seemed to work as the instructions indicated, but I had to pass the tubing directly onto the nozzles in the printer, so I did get the cleaning liquid in.

This works great!!! I have the canon g6020 and was having printing issues. I watched a few videos on YouTube and it brought me to try this method. Worked like a charm.

Did not work as expected and advertised. Followed boiler plate instructions with terrible results. This product caused a mess and did not clean as needed. Connectors did not work on my HP 8035. I think seller should make this right with the buyer.

It worked for what I needed but the instructions were poor and I had to figure out my own way to use it.

Was given my first (used) Epson Eco Tank. Apparently the original owner didn’t treat it kindly and it required a little wrench on it. Once I got the mechanical part situated, I needed to address the clogged printer head. This solution did the trick, and the printer works like new! Whatever the solution is, it worked like a charm! It was nice that included was a pair of gloves that came in super handy and all the necessary adapters and tubing. It’s a complete kit.