Keyless Entry Remote Control Key Fob Replacement Fits for Chevy Cruze Equinox Camaro Impala Malibu Sonic Buick Regal Verano Encore Allure Lacrosse GMC Terrain 2010-2021 OHT01060512 13504200

Worked great! Followed a video and webpage to swap the key blade and the transponder and it worked! Ordering a second one. Bought for a 2011 Chevy Cruze. Was fairly easy for someone who's not mechanically inclined at all. Would recommend!

Works well, I just swapped out the blank key with my original and I used back the original chip

I made it work. I swapped the uncut key tip from this one for my old one and paired it. There is a little pin you can knock out to swap.

The buttons on our old key fob broke last year so we bought this one. We opened it up, replaced the black key with our original, and connected it to the car. It worked okay, but we had to replace the battery within 2 months. 13 months later the unlock button broke, the battery is dying, and the fob keeps popping open. Tldr: It's a better deal than a mobile locksmith ($200-$300 CA), even better if you replace the key yourself. You'll probably have to replace the batteries and it will last a year if you're lucky.

If you have one key that's programmed and the other ones not this is the way to go. You can switch over the metal part into the new cover. It's simple to program it You stick the program key in the ignition. Remove it after 5 seconds. And then stick the key to be programmed in the ignition and for me it programs right away. It unlocks and locks the doors and starts the car. Definitely worth it if you have the old key That doesn't work. But one good key. A++++ rating

This is a replacement for the 1st fob I ordered, which I returned due to the "Lock" button being permanently pressed in when I received it (obviously a used/returned item). Amazon did replace it with one that seems to be new/unopened. After testing all the buttons, the "Lock" button does not seem to have the same audible "click" like the other buttons when pressing it, which seems to be a defect in the manufacturing process. However, I need a spare key, so instead of returning it, I took my original key from my broken fob and swapped it to the new keyfob. Programming was very simple...use a working key & fob (do not start the engine), turn the key until lights on dash come on and then go off by itself , then remove the key/fob, and within 5 seconds, insert the new, unprogrammed keyfob, turn the key until the dash lights come on then go off. Then, start the engine, I let my engine run for about a minute or so. The new fob should now be programmed to work the trunk and doors. If you do it this way, there is no need to have a new key lasercut. Note: when placing your old lasercut key into the new fob, you may have to spin the laser cut key counterclockwise once to put tension on the spring, then carefully close up the fob. This will insure that your key will "snap out" from the fob correctly. I used all the "key" parts from my old fob for proper fitment. You tube videos are helpful too.

Lock button doesn't work all the time

remote easy to program, buttoms work good. feel good quality. purchase this for 2013 chevy cruze

Me gusto la calidad del producto y me llego antes de tiempo !

Worked well with 2011 Cruze after dealer cut the key. Programming worked from first time.