ALY1424-BL-EU-K

Very stylish, fairly easy to install and looks great on the wall (surface mount) with the side mirror panels fitted. Really well thought out design.Only small issue was with the extra supports for the middle of the side panels: the double sided foam makes it too high to slide in the panels. I used simple double sided tape instead.

This cabinet is very well made and easily installed with option to have it recessed the mirror is bevelled edged and looks excellent. The price is very competitive would highly recommend this

Received on time as described

Bought this for a new house. It is very solid (and heavy) and well worth the price in my view. It was fairly easy to install myself but a second pair of hands was needed at one point. In hindsight I installed it a little too high as the demisted area of the mirror was less than the full area so it works for me but not so well for my wife who is a few inches shorter. Generally a great cabinet with adjustable shelves.

The media could not be loaded. This is an excellent bathroom cabinet and it is reversible but... to do so requires some modifications. In order to hang and have the hinges on the right side this is what I had to do as there are no instructions inside on how to do this and there is no wall template for the wall fastenings which would have made life easier given either of them. The electrical socket inside the cabinet is upside down in the reversed position and needs unscrewing and rotating. (You could leave it of course). The cables providing the power to the 3 pin internal socket are not long enough to allow you to rotate it. Modification requires you to breech the warranty by cutting through the middle of the blue and brown wires and using a wire stripper to strip the ends of the cut wires to about 1cm of bare wire on each end. (The wires have been attached to the socket with screws but a hard glue has been used to cover the screws and it is easier to simply cut them than to attempt to remove the glue). The socket can then be rotated through 180 degrees and screwed back in place. The wires can then be lined up correctly in their new position and Wago 221 inline electrical connectors (snap fit) can be used to perfectly bridge the gap. No extra cable is required. Next the power connector is held down by a strong cable clip held by a small nut and bolt. I would not advise attempting to reuse this bolt but leave it in place by removing the 7mm nut and putting the nut back on after taking off the cable tie. A small stainless steel nut 7mm and bolt 15mm approx can then be used to reattach in the new location in the lower of the spare holes near what will be the top hinge. Tighten the nut only after fitting the cable to the mains as this will allow adjustment of slack above the cabinet. Remember to put the cable through the hole in the electrical cover before attaching the lead to the mains otherwise you'll give yourself extra work doing it twice. So there are some improvements that could have been made in the design of this cabinet for use in the reversed position. I struggled to find a decent cabinet that had hinges on the right hand side that didn't cost twice as much. The manufacturer recommends it is hung on the wall by two people. It is heavy. The mirrors are excellent. I only ever placed the cabinet glass edges on soft surfaces to avoid chipping any of the glass.

A part was missing. The Parts list stated 4no. spacers for fitting side panels when there were only 2. However, all fits well without these. That being said, the cabinet is very well made, good quality, suitably rigid, and looks great. Additionally, nice to have surface mounting that does not require holes from inside the cabinet (external supports provided with cabinet sitting on one and held at top by others). Would certainly recommend.

I had two cabinets fitted to the new bathroom. The first cost £395 and was very good. This one I bought as an after thought. I could hardly believe the quality! it was as good, if not better than the first one!! at £126. I just wish I had bought this one first.It has everything that i needed, Quality, looks, and functionality. It was wall mounted and easy to install. right down to the mirrors on the side panels.Highly recommendedThank you

I bought the stainless steel version to surface-mount rather than recess. It arrived well packaged, but it was set up to install in a recess. In order to surface mount I had to install the separate side panels. This involved fitting the supplied brackets to hold the sides in place, but those brackets had razor-sharp edges and were very awkward to fit. I sustained two cuts on my fingers and was amazed at the clumsy, badly designed arrangement.Once the side panels were on they clattered and flexed and were very unsatisfactory. I improved the arrangement by packing out the gap between the panels and the body of the cabinet so that it was reasonably acceptable and then mounted the cabinet on the wall.The mirrored door is heavy in comparison to the body of the cabinet, and because the stainless steel is so thin, the whole thing flexes when you open the door. and the strongly sprung self-close hinges make the door awkward to open and close. The thinness of the metal creates a poor quality feel to the whole thing and, frankly, the cabinet is a disappointing item. I'm considering admitting defeat and replacing it with something better.