Aairhut Thermal Pad 13W/mK, 120x120x1mm Silicone Cooling Pad GPU CPU Non Conductive Heat Resistance Extreme Odyssey Cover with Dual Self-Adhesive Films for PC Laptop Heatsink/GPU/CPU/LED

A no frills cpu/motherboard combo that has shrunk my travel computer with very little compromise in terms of performance. The cooling is amazing, even in demanding tasks. Pegged at 100% usage, I found no thermal throttling with the 7945HX. I bought some ripjaws clocked for 5600mhz w tight timings and was immediately available in bios, running at 1T. There are 2 m.2 slots with their own heatsink, which is awesome. The wifi is pretty fast too!

First time using Aairhut thermal pads, compared to Arctic cooling’s TP-3 model thermal pad in the same 1.5mm sizing the Aairhut pads seem slighter heavier and more dense they don’t squish down as easily which I think is a good thing. Used these Aairhut thermal pads to replace junk stock thermal putty on an Xbox series S’s ram chips, heat sink and SSD. Have done this job on multiple Xbox series x’s which 1.5mm thermal pad is the proper size and so is for the series s for anyone wondering. The Aairhut thermal pads are easy to cut, I used a small square and new razor blade and didn’t have any issues at all. Thermal pad installs onto chips and contact areas nicely and adhere moderately well. Can absolutely tell a huge difference in heat transfer to heatsink now, no more frame stutters or “laggy” like game play even at 120fps for hours on end. Would highly recommend the Aairhut thermal pad for whatever your cooling needs may be!

For anyone repadding a 3080Ti FE, I would recommend these pads. These pads are exactly the same to Gelid extremes except you get 5mm more and they seem of higher quality. I used 1.5mm for the die and VRAM side and 2mm for the back plate. One large 2mm pack is enough for the back plate and one small 1.5mm pack is enough for the back plate. I tried 2mm on the die and VRAM but it prevented proper contact and temperatures were high. My GPU was manufactured on 05-02-2021, so its important to check when yours was made so you get the correct sizes. Overall, 1.5mm and 2.0mm should be it!

worked great on my nvidia 3060 temps lowered about 20 degrees idle and 10 degrees under load

I got the 1.5mm and it worked perfectly for my Bykski waterblock for XFX RX 7900XTX. I only need one and very pleased with the quality. I was able to complete re pad the front and back and have 40% left.

I been using this these thermal pads for a few years. As soon as I get a video card I replace them with these in the first week. they will drop your temps by 5c to 10c. Cant go wrong with these. Plus they gicve you more then enough for the price.

So I got this so I could liquid cool my Nvidia 3090 memory I love this foam it's super heavy for such a small size and it feels like silicone and no it is not silicone I will buy this again if I upgrade to a 5090 also I do have a tiny bit left over.

Excellent thermal pads. I purchased a used MSI RX 6600 XT that needed cleaning. After cleaning the fans, shroud, radiator/heat sink, and fin stack I just could not get rid of a funky odor the original owner left on it. It turns out the original pads caused most of the odor that radiated throughout the GPU. After carefully measuring and cutting out the new pads, the GPU ran cooler and smelled like new! The Aairhut Thermal pads work great! I highly recommended them. Thank you!