







🚙 Illuminate your Jeep, dominate the night!
The LX-LIGHT 7-inch LED headlights and 4-inch fog lights kit for Jeep Wrangler (1997-2017) offers plug & play installation with included adapters, delivering 600% brighter illumination using premium USA LED chips. Featuring white DRL halo rings and amber turn signals, these DOT and E-Mark approved lights ensure legal compliance and superior visibility. Built waterproof (IP67) and maintenance-free, they promise over 80,000 hours of reliable performance, making them the ultimate upgrade for Jeep enthusiasts seeking style, safety, and durability.










| ASIN | B01MTXNED5 |
| Assembly Required | Yes |
| Auto Part Position | Front |
| Automotive Fit Type | Vehicle Specific Fit |
| Best Sellers Rank | #27,905 in Automotive ( See Top 100 in Automotive ) #143 in Automotive Headlight Assemblies |
| Brand | LX-LIGHT |
| Color | Black |
| Customer Reviews | 4.5 4.5 out of 5 stars (1,683) |
| Date First Available | December 6, 2016 |
| Is Discontinued By Manufacturer | No |
| Item Weight | 2.2 pounds |
| Item dimensions L x W x H | 7 x 7 x 2.5 inches |
| Lens Color | Black |
| Lens Material | Glass |
| Manufacturer | LX-LIGHT |
| Manufacturer Part Number | LX-JHFCB |
| Product Dimensions | 7 x 7 x 2.5 inches |
| Special Feature | High Beam, Waterproof |
| Special Features | High Beam, Waterproof |
| Specific Uses For Product | Head Lights |
| Vehicle Service Type | Jeep Wrangler |
| Wattage | 90 watts |
| Year | 97 |
W**?
Daylight is right
This review is based on the initial installation of the main headlights and the included items. As of now, I'd say these are worth every penny and a no brainer compared to staying with stock lights. I would buy these before investing in any trail lights. I installed the main headlights today. The installation took me one hour and one beer start to finish. I needed a flat head screw driver, a T15 torx bit driver, line man's pliers, utility knife, four blue inline splice clips, and black electrical tape. Everything else came with the kit and felt like OEM quality. I used the flat head screw driver to pop the tabs up on the grill. The torx driver was for the light bracket and to adjust the beam angle. The pliers were to cut about five inches of excess wire from the lines provided to splice into the turn signals and to crimp the splices in place. The splices were used to tap into the turn signal wires. The electrical tape just helps to cover all the connections to resist water. The knife was needed to shave one of the tabs on the light to squeeze it in on the passenger side housing. This only required minor shaving that was about a minute of work. Everything else snapped right in. For example, the adapters did snap in to place on the headlight sockets with a firm push. Some folks said they had trouble with that one. The lights did seem to pattern high. So, I turned the beam adjustment screw two full turns on each side. At about twenty feet from my garage door, I could see some hot spots in the beam pattern. But it was not noticible while driving. After installing I drove to an event where I was bumper to bumper with folks for 20 minutes and police were guiding traffic. I never had any complaints about my new lights. After the trip, there was a small amount of condensation in both headlight assemblies that dissipated quickly when they cooled. I'm assuming this was from a small amount of moisture that got in the lights during shipping from China. I don't see a serious issue with this or a likelihood of leakage in the housing. April 2019 update: I've had these almost two years now and they are still going strong. No leaks. I did have to zip-tie the connections to ensure a solid lock on the driver side head lamp.
B**T
Awesome light so far! Absolutely love them!
Have had these lights for a couple of weeks now. For the price, they are AMAZING!!! Pros: Super bright Excellent functionality including the rings flashing yellow on the side when your turning signal is on. Included all the necessary items except the electrical tools and connectors Cons: The instructions are HORRIBLE! Don't bother using them, just you tube it and install it that way Suggestions: 1. Do not cut the cables as per the youtube instructions, get displacement connecting clips so that you don't need to cut the existing clips. 2. When you try to remove the fog lights, you can't due to a sway bar underneath so you will need to remove the plastic cover at the bottom of the grill. You need to remove the two plastic clips that hold it in place. It was impossible to remove them without drilling them out but I got new ones at NAPA for $5. 3.Make sure that you aim the lights!!! I did a test drive where people were beeping at me and flashing me for blinding them. Once I adjusted them, things are good now and they as SOOO bright. I love these lights! 4. The instalation will take at least an hour. Don't let these you tube guys make you think it will be less. I put my front tires on the little ramps which made it alot easier to get to the screws at the bottom. That said, it would have been better to get the fog light screws out through the top by removing the before mentioned plastic cover early. Hope this helps!
G**Z
Great visibility, great look – minor wiring required
These headlights work great. Nighttime visibility is a huge improvement and they look fantastic on the car — modern but still works well with a classic setup. They weren’t exactly plug-and-play in my case. I added an H4 harness and also wired in the turn signal, which required a bit of soldering. Nothing complicated if you’re comfortable with basic wiring, but worth mentioning so others aren’t surprised. Overall, build quality is solid, light output is excellent, and once installed they’ve been trouble-free. Very happy with the purchase and would definitely recommend if you’re okay with a little extra wiring.
S**Y
These headlights are seriously impressive. The brightness is off the charts, and the visibility they offer is incredible. Not only are they super bright and functional, but they also add a sleek and stylish touch to your Jeep. I can't help but give them a solid 5-star rating! 🌟🌟🌟🌟🌟
A**Y
Installed on 2010 JK. You have to file down the 3 tabs on the light to get it to fit into the socket. You will have to splice into the signal lights below the headlights. It's the white/stripe outer wire on each socket. I found a 'live with key' socket in the fuse box and tapped it for the DRL. I used my programmer to turn off the 'stock setting' we have in Canada, although I could set it as the turns signals or the fog lights. Bit of a pain in the arse to install and there is no diagram included but it's shown in the listing photos. All in all, it looks cool and it's waaaay better than the stock crap headlights.
M**L
Bought these headlight units 2 months ago and when I received them they looked good. took a while to get all the parts I needed to fit them to my Hummer H3 but when I got it all I paid to have them fitted. However one of the headlight units has a fault as the halo ring lights up white and orange all the time. I complained to Amazon.sa who said they had issued a full refund without the need to return, then I was told I would have to return all of the headlights and fog lights to get a refund. I explained that I just wanted a replacement for the faulty light as I didn't want to have to pay to have them all removed and then re-fitted again as it would cost more than the headlights themselves. They have refused to be understanding regarding the cost of removal and will not send the single headlight replacement even though I have sent pictures showing that only one light is faulty!. I do not recommend buying this product because odds are they will be faulty and Amazon.sa doesn't care about it.
G**N
Me quedaron muy bien , faciles de instalar y super luminosas!
D**C
I’m really disappointed that, the is No installation menu
TrustPilot
2 个月前
1天前