MagicEzyTile Repair Ezy : Repair Chips & Holes in Ceramic Tiles Fast - Thick Tile Filler - Repair Kit - 12.9mL / 0.43 fl OZ… (Light Grey/White)

It certainly does the job, well worth getting.

Detailed instructions. There is very little time to work with the mixture so you need to prepare everything for immediate application.The instruction to mix colours in a plastic bag is not practical as the mixture spreads out in the bag and becomes hard to work with. I mixed on a small plate instead. I bought the black and white kit to make grey but discovered that my grey tiles had other tints in them -? brown. The colour i got was not an exact match but usable. It would have been hard to get an exact match without spending on a lot of colours and making up test batches first.Expensive and you get a pretty small amount but worth it if you can manage to get a good enough colour match.

Like me you may think that this is a kit with which you can blend/change colour of filler? It is not a kit, it’s just one very expensive tube of beige filler!!

Bought from seller previously and product works perfectly.Follow instructions on the packaging and you won’t go wrong, conceals damaged area that it difficult to notice.Advise to take photos of colour of tile to find a good match

I have a small chip in one of our floor tiles and was going to just use regular, clear 2 part resin but thought I would try this first especially as it's specific to tiles.Application is pretty straight forward. Shake the tube for 2 minutes to mix the resin however this is also supposed to thin it to make it easier to apply. Viscosity was unaffected by shaking but for my purposes it didn't really matter.Apply the resin to the chip and smooth out. I actually used a Stanley blade to smooth it out and managed to get a very smooth finish.However, even after 2 weeks the resin never seemed to fully harden. It pulled away instantly and was the consistency of a soft rubber/gel. A complete waste of time and money.I have now filled the chip with the 2 part resin I was initially going to use and the results are reasonable if not perfect. Probably as good as I'm going to get without paying for a specialist to repair it. I have seen some on-line tutorials where they've used porcelain varnish so maybe that would have been a better option.

Simple to use. I used it to disguise two dark dents in the kitchen floor (from dropping heavy items). I could have experimented more to get a better exact match (who’s got time for that?) but regardless, it’s ten times better than a dark ugly dint mark

Tried to fill a large chip in a floor tile. The colour wasn’t an exact match which isn’t a huge problem but I over filled it as instructed but it still shrunk a lot as it dried and isn’t flush with the surface and is still very visible. Not thick enough to do the job unfortunately. Might try it again and keep adding layers until it’s smooth:

Strong & good product

Bought it for the second time. Worked great.

Tip! Have something small like a toothpick handy and put the liquid, which is somewhat thin at first then thickens up... use the point of the toothpick to spread it right away and apply in layers. After playing with this technique for a bit I managed to get a nice, smooth application. The instructions say to use a level but my tub ding is on the curved surface so this just didn't work... using a toothpick I was able to get a nice, smooth application and it's great! Another tip, if you're doing a white porcelain surface, do just get the plain white and not metalic white. =) All in all a great product!

muy pequeño el producto

Un ton trop foncé, et j’ai choisi le gris pâle

ok