TPM2.0 Module TPM SPI 12Pin Module with infineon SLB 9670 for Gigabyte Motherboard

Works. There are 2 versions of this TPM module, and they use the same connector, distinguished by which pin is missing. Before you order, take a close look at the picture, and check if the closed hole on this connector is in the same position as the missing pin on the socket on your motherboard.

I was about to trust the reviews about the fit and not purchase this TPM, but saw the photo in the website captioned "If the motherboard is a 2*6 socket, and SPI_TPM is written on the socket, it means that this product is supported. After inserting the module, you can upgrade your computer." The photo shows a sample socket in which the pins are in the correct pattern and appear to be surrounded by an enclosure, which mine has as well, so I thought the sizing issue may have been resolved-- this is a brand new motherboard of current generation, so why not? However, just as noted in the other reviews, the TPM is blocked by the pin enclosure (Z690 Master). Maybe the photo is showing an etched border or something, but mine is solid and the TPM won't fit (another reviewer's description of modding the TPM with a hacksaw suddenly made sense). However, I'm the new boards may support TPM 2.0 AND SPI 2.0 (these TPMs show TPM 2.0 S), and a newer version is TBD but not released. In any event, the whole rat's nest of poorly-worded and incomplete TPM descriptions is frustrating and unnecessary. Until there is some clarity, I'm not ordering a TPM from anyone, and I'm going to trust that enabling the TPM in the BIOS will pass Win 11's secret police. Good luck...

Works with “B650 GAMING X AX V2” gigabyte motherboard. box was damaged but i dont think it was the like that beforehand, i think it was amazon delivery or in the factory that damaged the box but either way it still works. very easy to install and i bent it and it still worked so actually very good.

I just received this TPM module today. The manufacturer has updated the design so the circuit board no longer goes all the way down to the bottom of the plug. Therefore the module fits my Gigabyte B650 Gaming without modifying the module or the TPM socket on the motherboard! I haven't started my build yet so I cannot verify that the module is TPM 2.0. I will update this review when my build is complete.

I went through a couple of different TPMs before I found this one that worked with my "GIGABYTE Z790 Eagle AX LGA 1700 Intel Z790 ATX Motherboard with DDR5, M.2, PCIe 5.0, USB 3.2 Gen2X2 Type-C, Intel Wi-Fi 6E, 2.5GbE LAN, Q-Flash Plus, EZ-Latch". I was able to install Windows 11 after successfully installing it. The BIOS immediately recognized the TPM and configured it automatically.

Due to the design, it wouldn't fit in the TPM socket. The connector does not stick out past the PCB. Had to return it.

As others have pointed out, the module does not fit in a socket that has a surround around the pins and is obviously designed for a set of exposed pins. It's because the black plastic connector on the TPM has the circuit board extend to be flush with the mounting face and that circuit board thickness interferes with the thin surround around the TPM pins. If Newhail shortens the circuit board material back about 1/8"-1/4", then the black connector will be able to fit into the socket. So, even though my motherboard is listed as supported (the TPM DOES work), it does not fit without some effort. I used snips to remove the upper side of the plastic surrounding my pins on my motherboard and the TPM will insert fully. BUYER BEWARE!

maybe it works but not on my gigabyte mobo. believe this tpm is for lga 1700. mine is 1151. found out mine is tpm lc 12p-1 2x6 9665. found one and put in mobo and it works and was able to load win 11.

Jai fait lerreur tpm cest securitaire

Defective design, will not fit a Gigabyte motherboard.

Needed TPM 2.0 module to install Windows 11. Worked fine with Gigabyte Z490 AORUS Pro AX motherboard.

Purchased it knowing I would have to modify module. I cut a part of the bottom.board off as there are no wire traces there and it was then able to plug into my mothboard. Alternatiiivel you can remove the plastic bezel from the tpm pins.

Just what was needed to allow requirements for windows 11 with my motherboard.