12" auxbeam led light bar

This light was worth every penny. It’s well built, and much brighter than I expected. The hardware and wiring that was included is high quality. Easy install. Includes everything you need to make it work. Hardware, wires, relay, fuse, switch and plenty of wire. Going to order 2 more for my Raptor and RZR

This light bar was an easy install. Good quality and lights are extremely bright. Because I installed it on my quad I didn’t want to direct wire it to my battery as the on/off switch it came with has a red and greed led light and the red light stays on all the time when the quad ignition is off and not running. So I wired it to a source where the ignition when on powers the harness.

I have a 2005 Polaris Scrambler. This light is outstanding. Incredible value. Only issue is that it must wire direct to the battery (for my quad) and the switch included has a tiny power indicator light that not only indicates power on, but also off. So there is a tiny light that is on all the time. It could potentially drain the battery over time. However, I keep mine on a trickle, so I'm not concerned. I can't say enough about the light though....Incredibly bright!

I purchased a Yamaha Grizzly a few months ago and it is a great ATV. But it is unfortunately missing some lights. It has halogen lights but not in a very wide pattern and not very bright. With that being said some aftermarket LEDs are in order. I purchased a 12” LED bar from AUXBEAM on amazon. The price was certainly right and the reviews were good. So I decieded to make the leap. Upon arrival the package was very tightly packed. The light itself was study and had a nice mount on it, the problem is the light itself does not come with a wiring harness, so I purchased one with it. The other thing is that the light does not have a mount for the vehicle. But that can be aquired pretty easily or we can bolt it on to the frame with a little modification. I will opt for the mount. I opted to mount it on the front cargo rack… unfortunately the first one that I had ordered didn’t fit. But this one was perfect! I added the mounts to the rack and adjusted the mounts on the light to fit, and bolted it on. The wiring harness was straight forward and easy to install. The harness was equipped with a relay and a fuse which is nice. I taped the connections between the light and the relay, and ran the wires under the plastic next to the fuel tank and into the battery compartment. The switch has 3M reversible tape and I adhered that just above the shifter. The Good: This is a fantastically bright LED setup at a nice low price. It is easy to install and does the job. I haven’t had a lot of time to run with it but thus far it is great. It has a wide beam with the last four LEDs on each side pointed to the side so that the field of view is expanded. It is also sealed and claims to be mothernature proof. The Bad: Cost of lighting is usually an indication of quality. Time will tell. The biggest problem I have with this setup so far is that it didnt include the harness or a generic mount. Auxbeam could have easily included these items for a complete package. Rating: This is recommended at this point because it is a cheap and easy setup. Just know that you need to get the mounts and harness. It is easy to install and can be added to any vehicle. It is highly recommended for a Hunting ATV rig that needs to be able to see the trail in the early hours of the morning. This light is amazing and lights every aspect of the trail.

This is a good light light, however, the relay is NOT a sealed unit. After the first rain the relay was full of water. My battery is located low and toward the rear of my pioneer 500. I will address and correct this issue myself as I am sure I would never get a sealed unit sent to my door. That aside, the light is great. The simple push button switch is not desirable, so I have mounted a nice rocker unit in the dash. But it is bright and affordable.

I have this light installed on three side-by-sides and two four wheelers. Works great! No issues. When I installed this, I used a different switch than the one that the wire harness comes with (used a rocker switch on the Side-by-Sides). One the four wheelers, I tied the relay into the high beam switch wire to trigger the relay and turn on the light. Works great. When you use your high beams, the lightbar comes on as well. No need to have a separate switch.

I shopped around on these light bars and this one is just as good as the $200 ones at a fraction of the cost. It is extremely brights. I thought it was going to be too small for my Honda Pioneer 500 but I was wrong, it really lights up the night. I have not seen how well they hold up to moisture and water yet. That will be the next test. Oh, and the included harness was easy to install. Directions, well not very good.

For the price point this does a great job, was easy to mount, wire myself and install. Highly recommend