Fayme Mining Frame Mining ETH Motherboard Bracket Thickened Bitcoin Mining Rig Case Support ITX/ATX for 8 GPU(ATX)

Easy to construct, sturdy frame, and provided a decent base for my test bench open PC ATX build.

Sturdy and stable. No documentation, only the pictures on the Amazon page, but if you can't put this together, you probably shouldn't be building a rig anyway. Didn't need the supplied switch - my mobo has a dedicated button.The base frame is slightly different to the one advertised, because in addition to the angle brackets to stabilise and support the back plate, there are two more pop-outs (triangular), presumably for the SSD.I use the open frame for component testing, with a standard ATX mobo, but if you want to use it for crypto-mining, it WILL take up to 8 cards with a mining mobo like the AsRock H110 Pro (see photo).

Now I wasn't looking for a "mining frame" just a plain motherboard tray... I don't know why it was so difficult to find *exactly this*, it was either spend the same amount on a piece of Acrylic, or spend 5x as much on a specific component of an old case or test bench... or cut up an old PC case, which I didn't really want to do either.It works expected, quality is decent, nice thick sheet metal, comes with all the screws plus spares.My only gripe is that the mini D-Sub cutout is far too big to actually fit a standard female connector... meaning the RS232 controller I wanted to use wouldn't fit.

I was very impressed at how sturdy and well constructed this was. I figured for around £25 I was going to get a flimsy bit of junk. I only needed it for a couple of projects so I wasn't to bothered. When I screwed it together I was nicely surprised.Comes with 9 motherboard stand off's and more than enough pci screws . Access to cpu cooler bracket underneath motherboard. Everything I needed for a test bench. Complete Bargain.

Didn't look like much when I took it out the box and there's no instructions. I had to refer to the pictures on amazon to see which way round the two panels fitted but managed to work it out

Came bent like a banana in a skim box so any pressure on box will damage as steel is wafer thin Amazon has sorted but would not use anyways not worth 10 euro

Really straightforward installing , not enough space for the cards , the ads are misleading, you will only fit 1 or 2 cards maybe 3 small ones and then you will not have enough air flow but good to start out with and I got this only for 15 euro.

Bought for testing setups prior to install into a case.Had to carefully follow the online instructions / video to clarify how to fit together, no instructions are provided.Only limitation is space for one storage unit only on the left side.Works fine as decent support for hardware whilst testing.You will also need a set of m/b switches to get powered up.